- ページ 7
ステレオシステム Philips AS 130のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips AS 130 18 ページ。 Midi-system
Philips AS 130 にも： ユーザーマニュアル (14 ページ), ユーザーマニュアル (22 ページ), マニュアル (15 ページ)
ページを印刷する
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the docking speaker.
•
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Note
•
The type plate is located on the bottom of the docking
speaker.
Connect the AC power adapter between
•
the DC IN socket at the back of the
docking speaker, and
•
the power supply.
Turn on
Press POWER to turn on the docking speaker.
» The Bluetooth indicator blinks on the
display panel.
•
To switch the docking speaker to
standby mode, press POWER again.
Switch to standby mode automatically
The docking speaker automatically switches to
standby mode when
•
no audio input cable is connected to the
AUDIO IN socket, and
•
the Bluetooth connection is invalid for 15
minutes.
Set time
1
Press and hold BRIGHTNESS/SET TIME
for two seconds.
» [24H] or [12H] begins to blink.
2
Press - VOL/TIME or VOL/TIME + to
select [24H] or [12H] for 24 or 12 hour
format.
3
Press BRIGHTNESS/SET TIME to confirm.
» The hour and minute digits begin to
blink.
4
Press - VOL/TIME or VOL/TIME +
repeatedly to set the hour.
5
Press BRIGHTNESS/SET TIME to confirm.
» Minute digits begin to blink.
6
Press - VOL/TIME or VOL/TIME +
repeatedly to set the minute.
7
Press BRIGHTNESS/SET TIME to confirm.
» The set time is displayed.
ON
Standby
POWER
EN
5