- ページ 13

DVDプレーヤー Toshiba CO60PMのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba CO60PM 28 ページ。 Upscaling dvd player with divx

ページを印刷する

1. Connecting to a Display

To change the programmed selections, use

to move the highlighted bar to the item

you want to change and press CLEAR, then input

the new number.

• Press

to move the highlighted bar to

then press PLAY or ENTER to start playback.

• To resume normal playback from memory playback,

use / /

to move the highlighted bar to "Clear",

then press ENTER. All the input programs will be

cleared.

Press PLAY button to resume normal playback.

Notes

• Some discs may not permit memory playback

operation.

• If you select repeat during memory playback, the DVD

player repeats the current memory playback.

• The programmed selections will be cleared when you

open the disc tray or turn off the DVD player.

15.SETUP button

Access the on-screen Setup menu for settings

adjustment.

16. VIDEO OUT button

Press to select the video output signal (RGB or HDMI)

Sometimes it can take awhile before the correct mode

is displayed.

17.SEARCH (T) button

• Press SEARCH (T) and use

to the title (TT) / chapter (CH) / track (TRK) / time.

eg.

DVD

VCD 2.0

TR K

CDDA

TR K

• Press the corresponding number button(s) for the title

(TT) / chapter (CH) / track (TRK) / time, then press

ENTER. Playback starts from the selected section.

Notes

• Pressing the CLEAR button resets the numbers. To

clear the display, press the SEARCH (T) button several

times.

• For VCD with PBC on, accessing tracks using number

buttons does not work.

to move the cursor

PB C

18.MUTE button

Press to mute and restore the sound.

19.SLOW button

Forward slow playback.

Each time you press the SLOW button, the slow-motion

speed changes in the following sequence:

Note

The sound is muted during slow-motion playback.

20.SUBTITLE button

For DVD discs, press this button to change the language

of the subtitle.

To turn off the subtitle, press the SUBTITLE button

repeatedly until the

Notes

• Some DVDs are set to display subtitles automatically,

and you cannot turn them off even if you set the subtitle

function to off.

• During some scenes, the subtitles may not appear

immediately after you select your desired.

• Some DVDs will allow you to make subtitle selections

and turn subtitles on or off only via the disc menu.

21.AUDIO button

For DVDs, press the AUDIO button to toggle between

different audio modes. The selected audio mode will be

displayed on the screen.

For VIDEO CDs, press the AUDIO button repeatedly

during playback to hear a different audio channel (Stereo,

Left, Right or MIX).

Notes

• When you turn on the DVD player or replace a disc,

player returns to the initial default setting.

If you select a sound track which is not included on

the disc, the DVD player plays a prior soundtrack

programmed on the disc.

• Some discs allow you to change audio selections only

via the disc menu. If this is the case, press the MENU

button and choose the appropriate language from the

selections on the disc menu.

22.PLAY button

• Press to start playback.

• The function is the same as the PLAY button on the

front panel.

23.STOP button

• Press once to stop playback and the DVD player

memorizes the location where playback is stopped.

• Press twice to clear the last playback position.

• The function is the same as the STOP button on the

front panel.

24.ENTER button

Press to conﬁ rm selections on a menu screen.

Play

1/4

1/8

is displayed.

: [

off

....