- ページ 5

ステレオシステム Philips AZ102SのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips AZ102S 14 ページ。 Cd soundmachine
Philips AZ102S にも：仕様 (2 ページ), ユーザーマニュアル (15 ページ), ユーザーマニュアル (2 ページ), ユーザーマニュアル (2 ページ), ユーザーマニュアル (15 ページ), ユーザーマニュアル (2 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (13 ページ), 仕様 (2 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (1 ページ), サービスマニュアル (11 ページ)

AZ102_05_ENG_CCR

2010.3.30

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved

plug proceed as follows:

Remove fuse cover and fuse.

Fix new fuse which should be a BS1362

Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an

appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a

value of

Amp. If a plug without a fuse is used, the fuse at the distribution board

should not be greater than 3 Amp.

Note:The severed plug must be disposed of to avoid a possible shock hazard should it

be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N),

brown = live (L). As these colours may not correspond with the colour markings iden-

tifying the terminals in your plug, proceed as follows:

•

Connect the blue wire to the terminal marked N or coloured black.

•

Connect the brown wire to the terminal marked L or coloured red.

•

Do not connect either wire to the earth terminal in the plug, marked E (or e) or

coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the

sheath of the lead - not simply over the two wires.

Recording and playback of material may require consent. See Copyright Act 1956 and

The Performer's Protection Acts 1958 to 1972.

15:14

Page 5

13 Amp

plug.To change a fuse in this type of

Amp, A.S.T.A. or BSI approved type.