DVDプレーヤー Toshiba E-2-15 ESE-RのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba E-2-15 ESE-R 14 ページ。 Toshiba dvd player owner's manual

Introduction

SAFETY PRECAUTIONS

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE

ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL

ONLY.

CAUTION:

This Digital Video Disc Player employs a Laser System.

To ensure proper use of this product, please read this owner's manual carefully and retain for

future reference. Should the unit require maintenance, contact an authorized service location.

Use of controls or adjustments or performance of procedures other than those specified herein

may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure.

Visible and invisible laser radiation when open and interlocks defeated.

DO NOT STARE INTO BEAM.

CLASS 1

LASER PRODUCT

In the spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player.

Model No.

Retain this information for future reference.

The following information applies only to the model for U.K.

If the socket outlets in your home are not suitable for the plug supplied with this unit,

the plug must be cut off and an appropriate one fitted.

The plug severed from this mains lead must be destroyed as it is hazardous if

inserted into a live socket.

IMPORTANT

The wires in this mains lead are coloured accordance with the following code:

BLUE: NEUTRAL

BROWN: LIVE

As the colours of the wires in the mains lead of this unit may not correspond with

the coloured markings identifying the terminals in your plug, proceed as follows:

The wire that is coloured blue must be connected to the terminal in the plug which

is marked with the letter N or coloured black.

The wire that is coloured brown must be connected to the terminal which is marked

with the Letter L or coloured red.

Do not connect either wire to the earth terminal which is marked by the letter E or

by the safety earth symbol

Use a 5A fuse which is approved by ASTA or BSI to BS1362.

Always replace the fuse cover after changing the fuse.

E-2-15 ESE-R.pmd

Serial No.

General Information

or coloured green or green-and-yellow.

3/10/2006, 11:19 AM