- ページ 34

ソフトウェア Epson V11H071920 - PowerLite 9300i SXGA+ LCD ProjectorのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson V11H071920 - PowerLite 9300i SXGA+ LCD Projector 42 ページ。 Product support bulletin(s)
Epson V11H071920 - PowerLite 9300i SXGA+ LCD Projector にも：操作マニュアル (36 ページ), パンフレット＆スペック (2 ページ), 操作マニュアル (47 ページ), クイックセットアップ (2 ページ), クイックマニュアル (20 ページ), 製品サポート速報 (28 ページ)

Using the control functions

Procedures for new timer settings

Procedure

Click "Add" on the timer setting window. The following

window is displayed and the new timer settings are applied.

At Operation, you can carry out the operations of turning the pow-

er on and off and switching the input sources, similarly for the con-

trol buttons on the main window. If you set the input source

switching, the projector's power will turn on at the timer start time

even if it is not on at the time. Because of this, it is not necessary to

make two separate timer settings for turning the power on and

switching the input source.

After completing the timer settings, click "OK".

The timer settings that have been made will be registered and they

can be checked in the displayed timer list.

You can enable and disable all of the timer settings that have been

registered. Select Timer - Enable or Disable from the Tool menu.