- ページ 5
ステレオシステム Philips AZ1836のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips AZ1836 8 ページ。 Mp3 cd soundmachine
Philips AZ1836 にも： 仕様 (2 ページ), 仕様 (2 ページ), 仕様 (2 ページ), クイック・ユース・マニュアル (1 ページ), ユーザーマニュアル (16 ページ), クイック・ユース・マニュアル (2 ページ), クイック・ユース・マニュアル (1 ページ), ユーザーマニュアル (9 ページ), サービスマニュアル (19 ページ)
ページを印刷する
MP3-CD/ CD Player
2 Press CD/USB to enter CD mode if USB is
displayed.
Display will show --- (See 2).
3 Open the disc door.
4 Insert a disc with the printed side facing up
and press the disc door gently to close.
Display:The total number of tracks
appears.
The disc scanning of MP3-CD may run
longer than audio CD.
5 Press 2; to start playback.
Display: 2 and the current track number.
For MP3-CD/ WMA only:
The current track number "XXX" and
album number "ALB XXX" will be
displayed interchangeably (See 4 5).
6 To pause playback press 2;.
Display: 2 and the current track number
flash.
7 Press 2; again to resume playback.
8 To stop playback, press 9.
Helpful hints:
The disc playback will also stop when:
–
you open the disc compartment door;
–
you select FM, AM or OFF position;
–
the disc has reached the end of the playback.
Selecting a different track
• Press ∞ or § once or repeatedly until the
desired track number appears in the display.
For MP3-CD/WMA: First press
ALBUM+/- once or more to find your
album.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold down
∞ or §.
The disc is played at high speed and low
volume.
2 When you recognize the passage you want,
release ∞ or §.
Normal playback resumes.
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to start
programming.
Display shows P01 indicating the start of
the program. PROG flashes. (See 6)
2 Press ∞ or § to select your desired track
number.
For MP3-CD/WMA: First press
ALBUM+/- once or more to find your album.
3 Press PROG to store the desired track.
Display shows P02, indicating the next
program location available.
4 Repeat steps 2 to 3 to select and store all
desired tracks.
5 Press 2; to play the program.
To review your program
In the stop position, press and hold PROG 3
seconds.
The display shows all the stored tracks in
sequence.
Helpful hints:
Display shows P01 if no track is
–
programmed.
–
If you try to store more than 20 tracks, no
track can be stored and the display will show
FUL.
MP3-CD/ CD Player
To erase a program
You can erase a program by:
– pressing 9 (twice during playback or once
in the stop position);
– selecting FM, MW or OFF position;
– opening the disc door.
Display: PROG disappears.
Selecting different play
modes (See 7)
You can select and change the various play
modes before or during playback, and
combine play modes with PROG.
REP – plays the current track continuously.
REP ALL – plays the entire disc/program
continuously.
SHUF – plays all tracks in random order.
1 To select play modes, press MODE once or
more.
2 Press 2; to start playback if in the stop
position.
3 To select normal playback, press MODE
repeatedly until the various modes are no
longer displayed.
– You can also press 9 to cancel your play
modes.
USB Connection
Using USB connectivity
•
AZ1836 is fitted with a USB port in the front
panel, offering a plug and play feature which
allows you to play, from your AZ1836, digital
music and spoken contents stored on a USB
mass storage device.
•
Using a USB mass storage device, you can
also enjoy all the features offered by AZ1836
which are explained and instructed in the
sections of disc operation.
Compatible USB mass storage devices
With the AZ1836, you can use
– USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
• USB device which requires driver
installation under Windows XP is not
supported.
Note:
In some USB flash players (or memory
devices), the stored contents are recorded
using copyright protection technology. Such
protected contents will be unplayable on any
other devices (such as AZ1836 device).
Supported formats:
– USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 -
4096
bytes)
– MP3 bit rate (data rate): 32-320 kbps and
variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8
levels
– Number of albums: maximum 500
– Number of tracks: maximum 1000
– ID3 tag v2.0 or later
– File name in Uicode UTF8 (maximum
length: 128 bytes
The system will not play or support
the following:
• Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.