- ページ 13
DVDプレーヤー Toshiba SD 3755のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba SD 3755 48 ページ。 Toshiba dvd player owner's manual
ページを印刷する
Connecting to a TV equipped with component video inputs
PROGRESSIVE SCAN: Some TVs or monitors are equipped with component video inputs that are capable of
reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest
quality pictures with less flicker.
COMPONENT VIDEO OUT: Some TVs or monitors are equipped with component video inputs. Connecting to these
inputs allows you to enjoy higher quality picture playback.
I
To switch the output signal (Progressive/Component)
Set the Progressive Scan to "On" on the SETUP menu for Progressive scan signal, or set the Progressive Scan to
"Off" on the SETUP menu for Component video signal.
To AUDIO OUT (L/R)
Audio/Video cable
(supplied)
Notes
❍
Refer to the owner's manual of your TV for TV operating instructions.
❍
Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
❍
Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, -Y, B-Y or Y, Cb, Cr)
❍
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum performance.
VIDEO OUTPUT SELECT switch
To COMPONENT VIDEO OUT/
PROGRESSIVE SCAN (Y, P
When using COMPONENT VIDEO OUT/PROGRESSIVE
SCAN (I/P) jack, set the VIDEO OUTPUT SELECT switch to
COMPONENT(PROGRESSIVE SCAN).
CONNECTIONS
Video cable (Y, P
, P
) (not supplied)
B
R
, P
)
B
R
To component video input or
progressive scan video input
To audio inputs
PAGE 13
TV or monitor with component
video or progressive scan inputs