- ページ 12

モニター MSI MSI-8000のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。MSI MSI-8000 44 ページ。 Rf remote display

1.7 Getting Started

The MSI-8000 is usually shipped along with a compatible sensor unit such as an MSI-7300

Dyna-Link 2, or one of MSI's advanced Crane Scales. MSI always ships these systems

pre-configured. If the MSI-8000 is purchased separately, or is to be used with a different

system, then the RF Transceivers will have to be mated. Follow the RF Setup Procedure in

Section 5.1.

Fully charge the battery by plugging the charger into the Charge Port. Depending on the

discharge level of the battery this can take up to 6 hours.

Once the RF Setup is complete for the MSI-8000, the system will instantly connect with

the Scale / Dyna-Link. It is advised to do a site survey to identify operating range and

usability of the RF Link. The easiest way to accomplish this is to position the Scale /

Dyna-Link at an average operational height, and then try the link at various positions and

distances. Range may vary by the rotation of the Scale / Dyna-Link. The RF Transceivers

used in the MSI-8000 are capable of much further range than the 100' typical spec, but

range is dependent on site and installation variables.

Available options for your MSI-8000 include the following:

• Serial I/O cable (RS-232) MSI PN 503489-0001 DCE Configuration, 503489-0002

DTE Configuration

• Serial I/O cable (RS-232) with charger pigtail MSI PN 503490-0001 DCE, 503489-

0002 DTE

Note

• Serial I/O cable (RS-232), 4m TPU Jacket, un-terminated. MSI PN 14359

• 26' (8m) Hardwired cable for RF free Remote Display. Connects 8000 to 7300 Dyna-

Link. MSI PN 14052

• RF Remote Modem, RS-232, PN 14401, for direct connection to Computers,

Scoreboards, or serial printers.

• RF Remote Modem, RS-485, PN 14402, for direct connection to 485 Serial Devices.

• RF Remote Modem, USB, PN 14403, for direct connection to Computers USB ports.

• RF Remote Gateway for direct connection to an Ethernet LAN, PN 14404. For use

with MSI's SCCMP program.

• RF or Hardwired Scoreboard Display. Various digit sizes from 1.2" to 8". Contact

MSI for models available.

When unpacking the MSI-8000, ensure that all parts are accounted for. Check the MSI-

8000 for any visible damage and immediately report any damage to your shipper. It is

advisable to use the original shipping container when shipping or transporting the 

MSI-8000. A standard MSI-8000 is shipped with a battery charger. The charger is

universal and will work on AC supplies from 100VAC to 240VAC.

MSI-8000

Operator's Manual

Allows serial output while being powered with Charger.