- ページ 21
ステレオシステム Philips BTB2090のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips BTB2090 26 ページ。 Audio systems
ページを印刷する
Set the alarm timer
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER.
» [TIMER SOURCE] (Timer Source) is
displayed.
2
Press SOURCE repeatedly or the source
selection buttons on the remote control to
select an alarm source: FM, CD, USB, DAB.
3
Press SLEEP/TIMER to confirm.
» The hour digits blink.
4
Press
or
5
Press SLEEP/TIMER to confirm.
» The minute digits blink.
6
Repeat steps 4-5 to set the minute and
alarm volume.
Tip
•
If the system is idle for 10 seconds, it exits alarm setting
mode automatically.
To activate or deactivate the alarm timer:
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate the alarm.
»
appears when the alarm timer is
activated.
Tip
•
If CD, USB, or DAB+ radio is selected as alarm source
and the audio cannot be played, FM tuner is activated
automatically when alarm time comes.
to set the hour.
Set the sleep timer
Note
•
Make sure that you have set the clock correctly.
•
When the system is turned on, press
SLEEP/TIMER repeatedly to select the
sleep timer period (in minutes).
» If the sleep timer is activated, is
displayed.
To deactivate the sleep timer:
Press SLEEP/TIMER repeatedly until [OFF]
•
(off) is displayed.
Play from an external audio
device
With this system, you can play audio from an
external audio device like MP3 player.
1
Connect an MP3 link cable to:
•
the MP3-LINK socket (3.5mm) on the
system.
•
the headphone socket on an external
device.
2
Press CD/MP3-LINK repeatedly to select
the MP3 link source.
3
Play the external audio device (see the
user manual of the device).
MP3-LINK
EN
19