- ページ 15

ステレオシステム Philips BTM5000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips BTM5000 22 ページ。 Micro system
Philips BTM5000 にも：クイックマニュアル (3 ページ)

ページを印刷する

Program radio stations

manually

You can program a maximum of 20 preset

radio stations (FM).

Tune to a radio station.

Press PROG to activate program mode.

» [PRG] (program) is displayed.

Press PRESET/ALBUM

a number to this radio station, then press

PROG to confirm.

Repeat the above steps to program other

stations.

Tip

•

To overwrite a programmed station, store another

station in its place.

Select a preset radio station

In tuner mode, press PRESET/ALBUM

•

to select a preset number.

•

You can also press the numeric keypad to

select a preset number directly.

Tip

•

Position the antenna as far as possible from TV, VCR, or

other radiation source.

•

For optimal reception, fully extend and adjust the

position of the antenna.

Select stereo/mono broadcast

For stations with weak signals: to improve the

reception, change to monaural sound.

In tuner source, press OK to select a

•

setting:

• [STEREO]: stereo broadcast.

• [MONO]: monaural broadcast.

to allocate

Show RDS information

RDS (Radio Data System) is a service

that allows FM stations to show additional

information. If you tune to an RDS station, an

RDS icon and the station name are displayed.

Tune to an RDS station.

Press RDS/DISPLAY repeatedly to scroll

through the following information (if

available):

» Station name

» Program type such as [NEWS] (news),

[SPORT] (sport), [POP M] (pop

music)...

» RDS RT

» Frequency

Synchronize clock with RDS

You can synchronize time shown on the unit

with that on the RDS station.

Tune to a RDS radio station that transmits

time signals.

Press RDS/DISPLAY for over 2 seconds.

» [CT SYNC] is displayed and the unit

reads RDS time automatically.

» If no time signal is received, [NO CT]

is displayed.

Note

•

The accuracy of the transmitted time depends on the

RDS station that transmits the time signal.