ページを印刷する1st Level Menu
Clock
(PRO MP273A/
PRO MP273AP/
PRO MP273AW)
Phase
(PRO MP273A/
PRO MP273AP/
PRO MP273AW)
H.Position
(PRO MP273A/
PRO MP273AP/
PRO MP273AW)
V.Position
(PRO MP273A/
PRO MP273AP/
PRO MP273AW)
Input Source
1st Level Menu
HDMI™
DP
D-Sub
(PRO MP273A/ PRO MP273AP/
PRO MP273AW)
Auto Scan
18
OSD Menus
2nd/3rd Level Menu
0-100
0-100
0-100
0-100
2nd Level Menu
Description
∙ Select an Input Source from the list.
OFF
∙ Users can use the Navi Key to select Input
ON
Description
∙ Adjust Clock setting.
∙ For D-Sub only, this setting will be
grayed out when detecting other
input sources.
∙ Adjust Phase setting.
∙ For D-Sub only, this setting will be
grayed out when detecting other
input sources.
∙ Adjust H.Position setting.
∙ For D-Sub only, this setting will be
grayed out when detecting other
input sources.
∙ Adjust V.Position setting.
∙ For D-Sub only, this setting will be
grayed out when detecting other
input sources.
Source at below status:
• While "Auto Scan" is set to "OFF" with the
monitor at power saving mode;
• While "No Signal" message box is shown
on the monitor.