- ページ 12
ステレオシステム Philips DCM2068/79のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips DCM2068/79 18 ページ。
ページを印刷する
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press
or
repeatedly to select a
channel number.
4
Press PROG again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press
radio station.
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press OK to switch between
mono and stereo broadcast.
or
to select a preset
6 Other features
Set the alarm timer
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER
until [SET TIMER] (set timer) scrolls on the
display.
» [SELECT SOURCE] (select source) is
displayed.
2
Press SOURCE repeatedly or the source
selection buttons on the remote control to
select an alarm source: disc, FM tuner, iPod/
iPhone/iPad, or USB.
3
Press TIMER to confirm.
» The hour digits blink.
4
Press
or
5
Press TIMER to confirm.
» The minute digits blink.
6
Repeat steps 4-5 to set the minute and
alarm volume.
Tip
•
If the system is idle for 90 seconds, it exits alarm setting
mode automatically.
•
If iPod/iPhone/iPad is selected as alarm source, and you
have created a playlist called "PHILIPS" in iTunes and
imported it to your iPod/iPhone/iPad, you will wake to
a random track in the playlist.
•
If no "PHILIPS" playlist is created in the iPod/iPhone/iPad
or no track is stored in the playlist, you will wake to
your last listened track in the iPod/iPhone/iPad.
To activate or deactivate the alarm timer:
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
»
appears when the alarm timer is
activated.
to set the hour.
EN
12