- ページ 8
ステレオシステム Philips DCM2068/79のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips DCM2068/79 18 ページ。
ページを印刷する
Store FM radio stations
automatically
When you connect AC power and no FM
stations are stored, the system prompts you to
search and store all the available FM stations.
1
Connect the system to the power supply.
» [AUTO INSTALL - PRESS PLAY, STOP
CANCEL] (to auto install, press
to cancel, press
2
Press
to start full scan.
» The system automatically stores FM
radio stations with sufficient signal
strength.
» The first preset station is broadcast
automatically.
Tip
•
To exit storing mode, press
Set clock
1
In standby mode, press and hold CLOCK
on the remote control for two seconds.
» [SET CLOCK] (set clock) scrolls on
the display.
2
Press CLOCK again.
» The 12 or 24 hour format blinks.
3
Press
/
repeatedly to select an hour
format.
4
Press CLOCK to confirm.
» The hour digits blink.
5
Repeat steps 3-4 to set the hour and
minute.
Note
•
If the system is idle for 90 seconds, it exits clock setting
mode automatically.
;
) is displayed.
or
.
Turn on
Press .
» The system switches to the last selected
source.
Tip
•
To select another source, press SOURCE repeatedly or
the source selection buttons on the remote control.
Switch to standby mode
Press
to switch the system to standby mode.
» The clock (if set) appears on the display
panel.
EN
8