- ページ 12

ステレオシステム Philips DS9800W/10のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips DS9800W/10 29 ページ。 Docking speaker system
Philips DS9800W/10 にも：クイック・スタート・マニュアル (2 ページ), サービスマニュアル (36 ページ)

ページを印刷する

4 Connect to

your home Wi-

Fi network for

AirPlay

To connect DS9800W to your existing home

Wi-Fi network, you need to apply your home

Wi-Fi setting to DS9800W.

You can do this in two ways (depending on

which type of Wi-Fi router you use):

Automatically - if your Wi-Fi router is

WPS (Wi-Fi Protected Setup)-enabled

and supports PBC (Push Button

Connection) (see 'Scenario 1: Connect

to a WPS router' on page 12)

Manually - if your Wi-Fi router does

not support WPS (see 'Scenario 2:

Connect to a non-WPS router' on

page 13)

Once connected successfully, DS9800W will

remember your home Wi-Fi settings. Then

you can enjoy AirPlay whenever DS9800W is

powered on and connected to your home Wi-

Fi network automatically.

Before connection of DS9800W to you home

Wi-Fi network, check the points below.

Make sure that your Wi-Fi router is

powered on and working properly.

Make sure that DS9800W has been

powered on and booted up successfully

(see 'Turn DS9800W on' on page 11).

Identify the type of your Wi-Fi router (see

the user manual of your Wi-Fi router for

details).

Scenario 1: Connect to a

WPS router

Note

Before you press any button on DS9800W, make sure

that DS9800W has been booted up successfully (see

'Turn DS9800W on' on page 11).

Press the WPS button on your home Wi-Fi

router.

WPS

Shortly after step 1, press Wi-Fi SETUP on

the back of the main speaker.

» The LED indicator blinks red, yellow

and green alternately.

» Within 2 minutes, the LED indicator

stops blinking and stays green, and the

unit beeps.

» DS9800W is connected to your home

Wi-Fi network successfully.