- ページ 6

プロジェクター Toshiba P500DLのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba P500DL 44 ページ。 Video wall projection unit

Toshiba P500DL サービスマニュアル
For servicing, maintenance and inspection
WARNING
If dust and dirt attached on the blades or the blade clamping face of the power plug, clean the dust and
dirt from the plug.
Otherwise, fire may occur due to lowering of insulation of the power plug.
CAUTION
Make a maintenance contract with the dealer and entrust the dealer with periodical inspection and
adjustment.
If the equipment is left for long time without cleaning dust inside the equipment, fire, electric shocks,
trouble of the equipment may result.
Servicing of the equipment shall be done after disconnecting the power plug from the outlet.
Otherwise electric shocks may result.
Pay attention for the connection cables.
Injury may occur by being caught by or stumbling on the cables. In addition, the equipment may fall
down, resulting in injury.
Items to be confirmed with the qualified vendor for installation works
WARNING
Do not use the equipment outdoors, fire or electric shocks may result.
This equipment has been designed exclusively for indoor use.
Do not install the equipment on unstable places.
The equipment may drop or fall down, resulting in injury.
Install the equipment on a rigid and level floor.
Confirm that the installation works are done for sufficient withstanding force against the overall load
of piled-up units and vibration of earthquake, etc. If the installation is unstable, the equipment may
drop or fall down, resulting in injury.
Do not install the equipment at places exposed to direct sunshine, or where temperature rises, such as
a place near heater, etc.
If the temperature inside the equipment rises, fire may result.
Do not use the equipment in places with high humidity, such as a bathroom or a place near a
humidifier.
It may cause fire or electric shocks. Also, the screen may be broken, resulting in injury.
Do not use the equipment with power voltages other than the one indicated on the equipment.
Otherwise, fire or electric shocks may result.
Make sure to install a circuit breaker in the power supply line exclusively for the equipment.
Otherwise, fire may occur because power supply cannot be cut off immediately when trouble or
abnormality occurs in the equipment.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
5
SAFETY PRECAUTIONS FOR USER