- ページ 10

プロジェクター Toshiba ProjectorのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Toshiba Projector 43 ページ。

Displaying video

Remove the lens cap.

Toggle the Power switch on the side of the projector to the On position.

The LED flashes green and the fans start to run. When the lamp comes on,

the start-up screen is displayed and the LED is steady green. It can take a

minute for the image to achieve full brightness.

? No start up screen? Get help on page 17.

Plug in and turn on your video device.

The video device's image should appear on the projection screen. If it

doesn't, press the Video button on the keypad.

? No start up screen? Get help on page 23.

Adjust the height of the projector by pressing the release button to extend

the foot.

Rotate the leveling foot at the rear of the projector, if necessary.

Position the projector the desired distance from the screen at a 90 degree

angle to the screen.

See page 39 for a table listing screen sizes and distances to the screen.

remove lens cap

toggle Power switch

turn on video device

adjust height

elevator

foot

adjust distance

rotate

leveling

foot

release button