- ページ 11
プロジェクター Toshiba TDP-EX21のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba TDP-EX21 29 ページ。
Placement
Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is "floor-mounted front projection." Set the [Projection mode] in the
Default setting 2 menu
, in accordance with your needs.
p.42
Floor-mounted front projection
Floor-mounted rear projection
Ceiling-mounted front projection
Ceiling-mounted rear projection
WARNING
•
Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS
when placing the unit. Attempting to clean and replace the lamp in a high location
by yourself may cause you to fall, resulting in injury.
•
If you wish to mount the projector on the ceiling, be sure to ask your dealer
to do so. Mounting the projector on a ceiling requires special ceiling brackets (sold
separately) and specialized knowledge. Improper mounting could cause the projector
to fall, resulting in possible injury and unit damage.
If the projector is ceiling-mounted, install the breaker for turning off the power in
•
case of anomaly. Let everyone involved with the use of the projector know that fact.
0
Projection Distance and Size
Use the figures, tables, and formulas below to determine the projection size and projection
distance. (Projection sizes are approximate values for full-size picture with no keystone
adjustment.)
Screen
a is the distance (mm, feet) between the lens and the
As seen from above
screen, and corresponds to a range of 580 mm (1.90
ft.) to 1501 mm (4.9 ft.). H is the height from the image
bottom to the center of the lens.
90°
a = 0.00375 × projection size (inches)
As seen from the side
Lens center
90°
a
2
+
14.815 × projection size (inches) – 18.3
Projection
Projection size
Height (H)
distance a
40 inches
580 mm (1.90 ft.) 91.4 mm (0.0 ft.)
50 inches
7 mm (.40 ft.) 114. mm (0.8 ft.)
60 inches
884 mm (.90 ft.) 17. mm (0.45 ft.)
80 inches
1191 mm (.91 ft.) 18.9 mm (0.60 ft.)
100 inches
1501 mm (4.9 ft.) 8.6 mm (0.75 ft.)
1