- ページ 28
プロジェクター Toshiba TDP-MT500のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba TDP-MT500 40 ページ。 Home projector
Toshiba TDP-MT500 にも: オーナーズマニュアル (42 ページ)
USING THE MENUS
OPTION MENU
OPTION...
RESET ALL
AUTO OFF
LAMP HOUR
INSTALLATION MENU
INSTALLATION...
LANGUAGE
RGB & COMPONENT
MIRROR
KEYSTONE
PATTERN
RGB & COMPONENT MENU
RGB & COMPONENT
AUTO
YES?
FREQUENTCY
PHASE
H. POS
V. POS
•
The items with the * mark function only for 1080i, 720p, 525p, and 625p input signals and input signals from DVI terminal.
•
The varying range of the vertical position depends on the type of the input signal. With some values the vertical position
may not change, but this is not a malfunction.
•
With the inputs from DVI-DIGITAL terminal, no change appear on the projected images with adjustment of the dividing
ratio and fine, but this is not a malfunction.
•
Without input signals, only some of the above items can be changed.
•
Contact your dealer for the ceiling mount bracket. As installation requires technical knowledge and skill, be sure to ask your
dealer for installation.
•
When mounted on the ceiling, the product shall be installed by the dealer with the bracket designed for this product. If you
attempt to install the product by yourself, you may fall and be injured or the product may fall causing injury.
28
ITEM
ENTER
RESET ALL -------------------------------- Pressing the ENTER button shows a confirmation box.
0
MINUTES
+11
HOURS
AUTO OFF ------------- 0 ---------------- Auto power off does not function.
LAMP HOUR ------------------------------- Indicates used-hours of the lamp. It is not possible to
ITEM
LANGUAGE -------------------------------- Selects a language used for displays on the screen,
RGB & COMPONENT ------------------- Adjusts computer video images.
AUTO * ------------------------------------ Selecting Auto and pressing the ENTER button
FREQUENCY * - -15 ~ +15 ---------- If any wide streak pattern appears on the projected
0
PHASE * ------------ 0 ~ +31 ----------- If any flicker or blur appears on the projected images,
15
0
0
H.POS * ---------- -30 ~ +30 ---------- Moves display position of projected images in a
V. POS * ------------ -30 ~ +30 ---------- Moves display position of projected images in a vertical
MIRROR ------- FLOOR FRONT ------ Select this setting with the projector set on the floor
CEILING FRONT ----- Select this setting with the projector suspended from
FLOOR REAR ------- Select this setting with the projector set on the floor
CEILING REAR ------ Select this setting with the projector suspended from
KEYSTONE ------- -12 ~ +12 ---------- Select this setting when correcting trapezoidal
PATTERN ---------------------------------- Pressing ENTER button reveals the test pattern for
SETTING
FUNCTION
Select "Yes" and press ENTER button. Then, the
settings that were made in the picture quality setting
menu and the professional-use picture quality setting
menu are changed to the factory-default settings.
10-90 MINUTES --------- Without a picture image signal input, the power is
automatically turned off at the preset time.
change the indicated used-hours.
SETTING
FUNCTION
such as menus.
automatically adjust position and size of the projected
images in accordance with the image signals from the
computer.
images, it can be adjusted with this setting while
viewing the images.
it can be adjusted with this setting while viewing the
images.
horizontal direction.
direction.
when viewing the projected images from the front side.
Normally, select this setting.
the ceiling when viewing the projected images from
the front side.
when viewing the projected images from the rear side
of the screen.
the ceiling when viewing the projected images from
the rear side of the screen.
distortion. Normally, select "0".
focus adjustment.