- ページ 24
ステレオシステム Philips Fidelio AD7050WのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips Fidelio AD7050W 30 ページ。 Philips fidelio soundavia wireless speaker ad7050w with airplay
Philips Fidelio AD7050W にも： クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (29 ページ), クイック・スタート・マニュアル (2 ページ)
ページを印刷する
6 Update
firmware
Note
•
You can only update the firmware from a PC/Mac.
Download the update file
www.philips.com/support
1
On your PC/Mac, go to www.philips.com/
support.
2
Enter the model number to find the latest
firmware upgrade file available.
3
Save and unzip the upgrade file to your
hard drive.
Update from the
configuration page
Warning
•
Always connect your AD7050W to AC power for
firmware upgrade. Never power off your AD7050W
during firmware upgrade.
22
EN
XXXX
XXXX. zip
Note
•
To use an Internet browser other than Apple Safari
on your PC/Mac, remember to go to the Wi-Fi router
configuration page and write down the IP address of
your AD7050W. See the user manual of your Wi-Fi
router for how to find the IP addresses of devices
connected to the Wi-Fi router.
1
Power on AD7050W (see 'Turn
AD7050W on' on page 7).
» It takes about 25 seconds for the unit
to boot up. During boot-up, the WI-FI
SETUP indicator on the back of the
unit blinks yellow.
» After boot-up, you can hear a beep
and the WI-FI SETUP indicator turns
to solid green.
» AD7050W is connected to the last
configured Wi-Fi network automatically.
2
Make sure that AD7050W and your PC/
Mac are connected to the same Wi-Fi
router.
3
Open Apple Safari on your PC/Mac, then
select 'Philips AD7050W XXXXXX' from
the Bonjour pull-down list.
•
Or open any other Internet browser
on your PC/Mac, then type in the IP
address of AD7050W (available on the
Wi-Fi router configuration page) at the
address bar.
» The AD7050W configuration web
page is displayed.