- ページ 3

ソフトウェア Epson V11H281020 - PowerLite 400W WXGA LCD ProjectorのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Epson V11H281020 - PowerLite 400W WXGA LCD Projector 6 ページ。 Warranty booklet
Epson V11H281020 - PowerLite 400W WXGA LCD Projector にも: ユーザーマニュアル (42 ページ), 操作マニュアル (36 ページ), 操作マニュアル (47 ページ), 補足マニュアル (4 ページ), ユーザーマニュアル (1 ページ), 更新マニュアル (4 ページ), 適合宣言 (4 ページ)

Epson V11H281020 - PowerLite 400W WXGA LCD Projector クイック・セットアップ・マニュアル
4
Connect your video source
Connect the projector to a computer or video source using any of the available
connections shown below.
Check the connectors on your video equipment. If more than one
connection is available, choose the one that provides the best quality.
The projector connectors from highest to lowest quality are
Computer (Component Video), S-Video, and Video (Composite Video).
A VGA computer cable is included. You can purchase optional video
and audio cables through Epson or an electronics store.
You can connect up to 4 video devices and use the remote control to
switch between them.
S-Video
cable
(optional)
Y ou can also connect an external monitor to simultaneously watch
NOTE
the display on your computer monitor (when the computer cable is
connected to the Computer1 port). To enhance the sound in your
presentation, you can connect external speakers. To monitor or
control the projector over a network, you can connect a network
cable. See the User's Guide on your CD-ROM for instructions.
RCA video cable
(composite video)
(optional)
L-Audio-R
Audio2 and Audio1 ports
Component
video to
VGA cable
(optional)
ports
VGA Computer
cable
(included)