- ページ 21

プロジェクター Toshiba TDP-S35UのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba TDP-S35U 25 ページ。 Mobile projector
Toshiba TDP-S35U にも：仕様 (2 ページ), 仕様 (2 ページ)

ページを印刷する

Lamp replacement (Continued)

Used Lamps

This projector's lamps contain trace amounts of environmentally harmful inorganic

mercury. Be careful not to break used lamps, and dispose of them in accordance with

local regulations.

Lens and main unit cleaning

WARNING

• Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership.

Attempting to clean/replace the lamp at a high site by yourself may cause you to drop

down, thus resulting in injury.

■ Lens cleaning

• Clean the lens with a commercially available blower and/or

lens cleaner.

• The lens is easily scratched, so do not rub it with hard objects,

or strike it.

■ Main unit cleaning

• Clean the main unit after unplugging the power cord.

• Wipe dirt off the main unit gently with a soft cloth.

• Do not wipe the main unit with a damp cloth. Doing

so may allow water to get inside, resulting in an

electric shock or failure.

• Do not use benzene, thinner and the like as they may

deform or discolor the unit or damage the paint

surface.

• When using a chemically treated cloth, follow the

precautions included with the cloth.

Others

Trouble indications

The indicator lights inform you of internal abnormalities.

No power

TEMP

FAN

LAMP

⇒ Problem with projector

• Unplug the power cord, and contact your dealer.

(Off)

Lamp went out during use, or won't come on

TEMP

FAN

LAMP

⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of

the lamp has ended or the projector is malfunctioning.

(Red lit)

• Unplug the power cord and wait for a short while, then turn the power back on.

• If a lamp burns out, replace it with a new one.

(Red lit)

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

Power went out during use

TEMP

LAMP

FAN

⇒ Internal overheating, or the outside temperature is too high.

(Red lit or flashing)

• Place the projector so that the air intake and exhaust are not blocked.

(Green lit)

• Unplug the power cord and wait for a short while, then turn the power back on.

❈ The

icon will appear before the power goes out.

Or (Orange lit)

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

(Red lit)

Power went out during use

TEMP

LAMP

FAN

⇒ Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

(Red lit or flashing)

❈ The

icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

(Orange lit)

(Red lit)

Power went out during use, or power won't come on

TEMP

LAMP

FAN

⇒ The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover.

(Orange

❈ After approx. one minute of abnormal display, the projector returns to

flashing)

the standby state waiting for internal cool down.

(Red lit)

Power went out during use

TEMP

LAMP

FAN

⇒ Problem inside the projector.

(Green lit

• Unplug the power cord and wait for a short while, then turn the power back on.

(Green lit

or Off)

(Green

• If the above action will not clear the problem, unplug the power cord,

or Off)

flashing)

and contact your dealer.

(Red lit)

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

TDP-SC35

Power went out during use

TEMP

⇒ Camera is not correctly connected.

LAMP

FAN

• Disconnect the power plug and check the connection with the camera.

❈ The

icon will appear before the power goes out.

(Green lit)

❈ After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

(Red lit)

PRECAUTION

• Make sure to unplug the power cord if something goes wrong.

p.39