- ページ 21
プロジェクター Toshiba TDP-T350 - XGA DLP ProjectorのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba TDP-T350 - XGA DLP Projector 31 ページ。 Tdp-t250u user's guide
ページを印刷する
Using the menus (Continued)
V-position
Adjust the vertical position of the image.
Move down
Clamp 1
Adjusts the clamp pulse position.
Lower
Clamp 2
Adjusts the clamp pulse width.
Narrower
Equalizer
Reduce noise on the screen.
Adjust with
button.
*1: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to
[NTSC] and [NTSC4.43].
NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for other
languages.
*2: [Noise reduction] may not work depending on signal type.
*3: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to
[NTSC] mode is set to JAPAN when the language is set to Japanese. It is set to US for other
languages.).
No
No
Yes
No
Move up
No
No
Yes
No
Higher
No
No
Yes
No
Wider
Yes
Yes
No
No
40
■ The display setting menu
Yes
Yes
Use this menu to set screen display-related items.
(The items in gray color cannot be set with the current input selection.)
Yes
Yes
Item
Yes
Yes
Screen size
No
No
Language
Background
Icon
Beep sound
Start-up screen
User logo
アイコン後送
Detailed description
[Screen size]
• If "Thru" is selected for screen size, portions exceeding the native resolution
(1024 × 768 pixels) will not appear on the screen. Note that for RGB signals with
clock frequency 140MHz or lower, all input pixel signals are sampled. However, if
the clock speed is higher than this, the RGB pixel signal is thinned before
sampling.
• If you use this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
Description
(Full): Display with 1024 × 768 dot resolution
(Thru): Display with sampling resolution (for computer input only)
(Wide): Wide-screen display
Select one of the languages below to use for displaying the menu and messages
[
or
: Enter setting mode]
[
English/Français/Deutsch/Italiano/Español/Português/
Svenska/Türkçe /Polski/
/
Screen to display when there is no input signal
[
or
: Enter setting mode]
[
Logo/Blue/None
Display icons as function guides
Sound a beep when operation is done.
Display start-up screen when power is turned on
Display a logo customized by the user for the start-up screen or when
there is no input signal.
[
:Enter setting mode]
[
: Selection]
Register logo
Press
to display the register menu.
Display mode
[icon]
[icon]
Background color
Black
Blue
Preview
Press
.
Reset logo
Yes
No
41
:Selection]
[Apply:
]
/
/
/
:Selection]
[Apply:
]
On
Off
On
Off
On
Off
White