- ページ 25
プロジェクター Toshiba TDP-TW100のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba TDP-TW100 46 ページ。 Brochure
Toshiba TDP-TW100 にも： 製品仕様 (2 ページ)
ページを印刷する
Setting up the wireless LAN (Continued)
■ Setup using the Setting display (2)
● Projector settings (Be sure to read this subsection.)
Using the factory settings as-is may suffer security damage, so be sure to
change the projector settings.
1. Press the MENU button twice
2. Select a Category
Select a category by using
.
The following four categories
are available:
Wireless utility
p.49
setup
Slide Show setup
p.55
p.60
Control setting
Status display
p.61
3. Make settings
Press
or
Item
The figure shows a typical example. As the display may differ depending on the
item, use the following pages as a reference.
While the video file transfer function of wireless utility is in use, the background
image of the Setting display (2) does not appear.
4. Back
RETURN button
5. End
Press the MENU button or RETURN button.
(The menu disappears 30 seconds after the last operation.)
The Setting display (2) is displayed.
* Appears only when Wireless/USB input is selected.
Displays the current settings
of selected category.
Item shown in gray cannot
be set with the currently set
conditions of the projector.
to open the menu.
These marks signify the items can be
selected from the list by using
.
After an item is selected, apply it by
pressing
.
48
■ Setting Wireless Utility
If you select Wireless Utility, the following items can be set.
Item
Easy Connect
[Yes
No]
[Enter:
(USB memory)
Network settings
Mode: Ad hoc
Standards: IEEE802.11b
Channel: Select a number (1 to 11) using the
SSID: Specify a desired character string (1 to 32 characters).
[
: Move left or right one character.]
Encryption: On
Network authentication: Open
Key index: Select a desired number (1 to 4) set by
WEP key: Specify a desired character string.
(5 to 13 characters, or 10 to 26 digits in hexadecimal notation)
[
: Move left or right one character.]
DHCP: Use
Not use
IP address: Enter using the numeric keys of the remote control.
[
: Move left or right one character.]
Subnet mask: Enter using the numeric keys of the remote control.
[
: Move left or right one character.]
Gateway: Enter using the numeric keys of the remote control.
[
: Move left or right one character.]
Confirm: [OK]
Setting
Reset all the network settings.
initialization
Confirm: [Yes]
Projector
Specify a desired character string (0 to 8 characters).
name
[
or
: Enter setting mode.]
character.]
[
to
: Set a character.]
Confirm: [OK]
Remote
Specify whether to allow the remote control of the projector from a computer.
control
Allowed
Presentation
Allowed:
The projector always accepts remote commands from a computer.
Presentation:
Accepts only the remote commands from the computer whose screen is
currently displayed via the projector (Update automatically) using Wireless
Utility.
Forbidden:
Always ignores any remote commands from a computer.
WEB browser
Browser authentication: Switch on/off the password authentication for access to the
setting screen using the Projector Configuration Tool.
Password: Enter the password used to access the setting screen when the Browser
authentication is set to On. A character string (1 to 8 characters) can be specified as
desired.
[
: Move left or right one character.]
Confirm: [OK]
* To enter characters, use the numeric keypad on the remote control.
Description
]
Infrastructure
IEEE802.11g
buttons.
[
to
: Set a character.]
Off
Shared
.
[
to
: Set a character.]
[
to
: Set a character.]
[
to
: Set a character.]
[
to
: Set a character.]
[Cancel]
[Enter:
]
[No]
[Enter:
]
[
: Select item.]
[
: Move left or right one
[Cancel]
[Enter:
]
Forbidden
On
[
to
: Set a character.]
[Cancel]
[Enter:
]
49
Off