- ページ 26

プロジェクター Toshiba TDP-TW300UのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba TDP-TW300U 47 ページ。 Toshiba tdp-tw300u dlp projector specifications
Toshiba TDP-TW300U にも：クイックマニュアル (5 ページ), 仕様 (1 ページ), 仕様 (2 ページ)

ページを印刷する

How to use the USB terminal

This projector can connect with a commercial USB memory and a USB memory card

reader that are USB2.0 compliant, a digital camera or the like and display the JPEG files

saved in those devices.

p.59

(Toshiba does not guarantee the operation of all USB 2.0-compliant devices.)

To connect or disconnect a USB device, use the following procedure:

■ Connecting USB memory

q Remove the slot cover.

Slightly push the circled part and slide toward the arrow.

w Plug the USB memory.

Make sure the orientation is correct then plug the

USB memory in until it stays securely.

■ Disconnecting USB memory

q Press the MENU button twice to display the Wireless/Card menu then

select and run Slideshow settings and Unplug device.

The processing for disconnecting a USB device starts.

w The message "Safe to remove the USB device". appears on the

screen.

e Unplug the USB device.

Be sure to perform the above operations. Disconnecting a USB device during

operation may cause a malfunction or data corruption.

Precautions

• The USB terminal does not support the supplied mouse remote control receiver or

a commercial mouse controller.

• A USB hub is also not supported.

• Turning off the main power or disconnecting the power plug while the USB device is

operating may cause a malfunction or data corruption.

Slot cover

USB memory

Setting up the wireless LAN

■ Functions

The following functions are available via wireless communications, when the wireless LAN

PC card and dedicated Wireless Utility software

Note: A wireless LAN PC card except the supplied one (or recommended by

Toshiba) does not work with this product. Please ask your dealer about the

available wireless LAN PC card.

1) Displaying a computer's screen via the projector

The computer's desktop screen can be sent, as well as the screens of a variety of

software applications, to the projector for display.

2) Displaying an image saved on a computer via the projector

JPEG files can be sent to the projector for display.

3) Operating the projector by means of a computer

Some of the same functions available from the remote control can be performed.

■ Communication mode

This projector supports both Ad hoc and Infrastructure Communication modes.

◆ Ad hoc communication mode

For security reason, confirm the specifications of your computer for the distance that

the radio wave can reach. The coverage of this projector may vary, depending on the

computer and the surrounding environment. When tested with a PC manufactured by

Toshiba with built-in wireless LAN system, the coverage is approximately 60 m with an

unobstructed path between the projector and computer placed indoors. This figure is

not guaranteed and should be considered as merely a guideline.

◆ Infrastructure communication mode

To LAN,

Internet, etc.

Hub

Access point

Use the appropriate transmission mode for your network environment.

p.66

included with this projector are used.

This is transmission mode to communicate

between wireless LAN equipment.

Wireless communication can be performed via the

simple configurations. This function can only be

used if the projector is in range of the computer's

wireless signals.

A mixed wireless and wired LAN can be created

via access points. Connecting to the rest of the

world via a wired LAN or the Internet generally

requires a high level of security.