ページを印刷する
4. Connecting a video source to the TOSHIBA TDP490
The procedure for connecting a video
source to the TOSHIBA TDP490 is the
same for S-video and Composite video
SECAM, PAL N and PAL M modes are manually
selected by pressing "Green Button". If the right format
is not found first time, press again. The video format is
stored separately for each connector.
1.
Make sure that the video source and the
TOSHIBA TDP490 are switched off.
2.
Connect the video cable from the Video out
connector of the video source to the correct video
connector on the TOSHIBA TDP490 plug panel.
3.
Connect the audio cable from the Audio out
connectors of the video source to the Audio in
connectors on the TOSHIBA TDP490. Connect the
red plug to the red connector, and the other plug to
the white connector. Red is the right stereo
channel.
10
4.
When all the connections are done and verified,
switch on the video source and the TOSHIBA
TDP490.
5.
The TOSHIBA TDP490 will now automatically
display the pictures from the video source. If not,
see the section 'What do I do if'.
TV input is option
Figure 9:
Connecting to video sources
Contents