- ページ 9
ステレオシステム Philips FW-C100/21のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips FW-C100/21 27 ページ。
ページを印刷する
D
Connecting other equipment to your
player
You can connect the audio left and right OUT
terminals of a TV, VCR, Laser Disc player, DVD
player or CD Recorder to the AUX IN terminals
at the rear of the system.
E
Adjusting the Operating Voltage (not
available for version /30)
Before connecting the AC power cord to the
wall outlet, make sure that the voltage selector at
the rear of the system is set to the local power
line voltage. If not, reset the selector before
connecting to the wall outlet.
F
AC Power Supply
After all other connections have been made,
connect the AC power cord to the system and
to the wall outlet.
Controls on the player and
remote control
1
STANDBY-ON y
–
switches the system to standby/on.
2
PROGRAM
for CD ................. to programme disc tracks.
for TUNER ........ to programme preset radio
stations.
for CLOCK ....... to select 12 or 24 hour in clock
setting mode .
3
DSC (DIGITAL SOUND CONTROL)
–
to select the desired sound effect :
OPTIMAL, JAZZ, ROCK or TECHNO.
4
DISPLAY SCREEN
–
to view the current setting of the system.
5
CD CHANGER TRAY
6
DISC CHANGE
–
to change disc(s).
7
OPEN•CLOSE
–
to open or close the CD changer tray.
8
DISC 1 / DISC 2 / DISC 3 (DISC DIRECT
PLAY)
–
to select a disc tray for playback.
pg 01-27/C100/21-Eng
Inserting batteries into the
Remote Control
¶ Insert the batteries (Type R06 or AA) into the
remote control as shown in the battery
compartment.
CAUTION
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances, so
they should be disposed off properly.
Controls
9
SOURCE – to select the following:
CD / (CD 1•2•3)
–
to select CD mode. When disc playback is
stopped, press to select disc tray 1, 2 or 3.
TUNER / (BAND)
–
to select Tuner mode. When in tuner mode,
press to select the waveband: FM or MW.
TAPE / (TAPE 1• 2)
–
to select Tape mode.
AUX (VIDEO)
–
to select sound from an external source (e.g. TV,
VCR, Laser Disc player, DVD player or CD
Recorder).
0
MODE SELECTION
SEARCH à á (TUNING à á )
for CD ................. to search backward/forward.
for TUNER ......... to tune to a lower or higher radio
for CLOCK ....... to set the hour (on the system
9
Preparation
(illustrations on page 3)
frequency.
only) .
3139 115 20361
29/05/2001, 09:57 AM
9