- ページ 28

プロジェクター Toshiba TLP-S220のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba TLP-S220 37 ページ。 3 lcd data projector xga / svga / high brightness / with pc card slot & document camera
Toshiba TLP-S220 にも：オーナーズマニュアル (37 ページ)

ページを印刷する

Using the menus (Continued)

I The image adjustment menus

Use this menu to adjust image-related items.

Items Items that can be adjusted are marked with "Yes", and those that cannot are marked

with "No".

Item

Description

Contrast

Lower

Higher

Brightness Darker

Brighter

Color

Lighter

Deeper

Tint

[Note 1]

Reddish

Greenish

Sharpness Softer

Sharper

R-level

Less red

More red

G-level

Less green

More green

B-level

Less blue

More blue

Up/down shift

[Note 2]

Shift down

Shift up

Notes

1: Tint can only be adjusted when Video mode

2: Up/down shift can only be adjusted when Screen size

I The default setting menu

This menu shows placement status and other settings.

Item

Projection

Set projection mode in accordance with Placement Style

mode

(Placed

on floor)

No signal

Set the time to wait after signal input stops until turning off the power:

power off

Off (not turned off)

Power on

Set whether to turn on the power when the ON/STANDBY button is pressed

(Manual), or when the power cord is plugged in (Auto). Manual

Lamp power

[Note 1]

Set the lamp power

Standby mode

[Note 2]

Set standby mode according to functions used Standard

Notes

1: When lamp power is set to low, the screen becomes a little darker, but the cooling fan noise gets

quieter. This setting will be cleared when you turn the power off. The setting will be back to

"Standard" when the power is turned on next time.

2: The Standby mode function is only available with models equipped with a PC card slot

Notes

• Note that if Power on is set to Auto, then if the power cord is plugged in when power is

restored after a power outage, the projector power will come on.

• Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power.

Unplugging the power cord to cut off the power will shorten the life of the lamp.

Video

Computer Y/P

PC Card Camera

S-video

Yes

p.29

is NTSC or NTSC4.43.

p.55

is Wide.

Description

p.21

(Hung from

(Back hung

(Rear)

ceiling)

from ceiling)

1 min

2 min

...

60 min

Standard

Low

Economy

p.41

I The display setting menu

Use this menu to set screen display-related items.

Item

Screen size

Not displayed with

PC card input or

Yes

camera input.

Yes

Language

Yes

Background

Yes

Icon

Yes

Start-up screen

Note

• If "Thru" is selected for screen size, portions exceeding the pixel count of the LCD panel

p.69

will not appear on the screen. Note that for RGB signals with clock speeds UXGA

or lower, all input pixel signals are sampled. (This effect is noticeable when the

p.70

screen is enlarged using the Resize function

than this, the RGB pixel signal is thinned before sampling.

I The PC card setting menu

Use this menu to set PC Card-related items.

G When using a memory PC card

Auto

Item

Input select mode

Manual

Auto. Demo

Off

Interval

Select one of the following slide show display intervals:

5 sec./10 sec./30 sec./1 min./3 min./5 min./10 min.

File deletion

Delete the selected file (Folders cannot be deleted)

[

Description

(Full): Display with LCD panel's resolution

(Thru): Display with sampling resolution (for computer input)

(Wide): Wide-screen display (for Video, S-video, and Y/P

Select one of the languages below to use for displaying menus and messages

[

: Enter setting mode]

[

:Selection]

English/Français/Deutsch/Italiano/Español/

Português/

Screen to display when there is no input signal

Display icons as function guides

Display start-up screen when power turned on

p.31

). However, if the clock speed is higher

(Models equipped with PC card slot)

Description

Auto (Switch to PC card input when a PC card is inserted)

On (Begin slid show when PC card is inserted)

: Enter execution mode]

[Yes

)

[Apply:

]

(Logo)

(Blue)

(None)

Off

No]

[Apply:

]