- ページ 36

コンピュータ・ハードウェア MSI MS-98H2のPDF マニュアルをオンラインで閲覧またはダウンロードできます。MSI MS-98H2 42 ページ。 Qseven r 2.0 cpu module board
MSI MS-98H2 にも：マニュアル (42 ページ)

BIOS Setup

should be displayed on the screen to the serial COM port for display on the

terminal screen. Besides, all data received from the serial port is interpreted

as keystrokes from a local keyboard.

▶ Console Redirection Settings

▶ Terminal Type

To operate the system's console redirection, you need a terminal support-

ing ANSI terminal protocol and a RS-232 null modem cable connected be-

tween the host system and terminal(s). This setting specifies the type of

terminal device for console redirection.

▶ Bits per second, Data Bits, Parity, Stop Bits

This setting specifies the transfer rate (bits per second, data bits, parity,

stop bits) of Console Redirection.

▶ Flow Control

Flow control is the process of managing the rate of data transmission be-

tween two nodes. It's the process of adjusting the flow of data from one

device to another to ensure that the receiving device can handle all of the

incoming data. This is particularly important where the sending device is ca-

pable of sending data much faster than the receiving device can receive it.

▶ VT-UTF8 Combo Key Support

This setting enables/disables the VT-UTF8 combination key support for

ANSI/VT100 terminals.

▶ Recorder Mode, Resolution 100x31

These settings enable/disable the recorder mode and the resolution

100x31.

▶ Legacy OS Redirection Resolution

This setting specifies the redirection resolution of legacy OS.

3-14