ページを印刷する
h Safety Precautions
The following precautions should be observed while handling the system:
■ Place the system on a flat and stable surface.
■ Do not place the system in environments subject to mist, smoke, vibration,
excessive dust, salty or greasy air, or other corrosive gases and fumes.
■ Do not drop or jolt the system.
■ Do not use another power adapter other than the one enclosed with the system.
■ Disconnect the power cord before performing any installation procedures on
the system.
■ Do not perform any maintenance with wet hands.
■ Prevent foreign substances, such as water, other liquids or chemicals, from
entering the system while performing installation procedures on the system.
■ Use a grounded wrist strap before handling system components such as CPU,
Memory, HDD, expansion cards, etc.
■ Place system components on a grounded antistatic pad or on the bed that
came with the components whenever the components are separated from the
system.
Important
Important
The system photos are provided for demonstration of system assembly only. The
internal view of your system may vary depending on the model you purchased.
MS-S2201, MS-S1201
2-3