- ページ 3

無線アクセスポイント 3Com 3crwe875075aのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。3Com 3crwe875075a 10 ページ。 Wds bridging and antenna installation
3Com 3crwe875075a にも：変換マニュアル (10 ページ), クイック・スタート・マニュアル (8 ページ)

ページを印刷する

Safety Guidelines

Only a licensed electrician with expert knowledge of outdoor installation and weather proofing

techniques should perform an outdoor installation. Professional network personnel should oversee the

entire installation. The importance of this is paramount, for the sake of compliance with local building

codes, regulatory issues, and for the safety of people and equipment.

CAUTION: Review the safety notices on page 9 before continuing.

Remote Building Wireless Access with the AP8850

This installation scenario describes one layer of bridging with one Root-Bridge and one Child Bridge. This

scenario is common, for example, in schools or universities where students or professionals in remote

buildings need secure, high-bandwidth wireless access.

In this configuration, an AP 8850 is installed and connected to the wired LAN and at each of the desired

remote locations.

The bridge at the center of the network is configured as the Root Bridge with an

omnidirectional antenna.

The remote bridges are configured as Child Bridges and use directional antennas, which

are aimed at the Root Bridge antenna.

The 802.11g radio at the remote location can be configured with any security configuration desired,

including open security or full WPA security with 802.1X client authentication and AES encryption.

Child Bridge 1

Child Bridge 2

Root Bridge