- ページ 3

ヒーター Dimplex 403TSFTIE7のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dimplex 403TSFTIE7 9 ページ。 Convector heaters

Dimensions (millimetres)

Model Specification

403TSFTiE7: 3.0kW convector heater with electronic controls and

turbo boost

WARNING: THIS APPLIANCE MUST BE EARTHED

The use of an extension lead or multi-plug adaptor is not adviced when connecting this product to the mains. Connection through these

deviceS could lead to risk of overloading, overheating and even fire at the extention lead or adaptor due to inadequate connection quality

This heater must be used on an AC (~) supply only and the voltage marked on the heater must correspond to the supply voltage. This heater

is fitted with a rewirable plug incorporating a 13 amp fuse. In the event of replacing the fuse in the plug supplied, a 13 amp fuse approved by

ASTA to BS 1362 must be used. If any other type of plug is used, a 15 amp fuse must be fitted in the plug, the adaptor, or at the distribution

board.

IMPORTANT: If the plug is not suitable for your socket, the 13 amp plug should be removed. Before wiring the appropriate plug, please note

that the wires in this mains lead are coloured in accordance with the following code:

GREEN AND YELLOW:

BLUE:

BROWN:

Connect the GREEN AND YELLOW wire to the terminal marked 'E' or by the earth symbol, or coloured GREEN or GREEN AND YELLOW.

Connect the BROWN wire to the terminal marked 'L' or coloured RED. Connect the BLUE wire to the terminal marked 'N' or coloured BLACK

Model Identifier(s)

Heat output (kW)

Nominal heat output

Minimum heat output (indicative)

Maximum continuous heat output

Auxillary electricity Consumption

At nominal heat ourput

At minimum heat output

In standby mode

Tubo Fan

Contact details

Electrical Connection

EARTH

NEUTRAL

LIVE

Pmax,C

elmmin

Glen Dimplex Heating and Ventilation, Millbrook House, Grange Drive,

Hedge End, Southampton, SO30 2DF

403TSFTIE7

Pnom

Pmin

1.95

elmax

0.00

elSB

0.00