- ページ 2
ヒーター Dimplex Alderbury ALB20のPDF 設置および操作説明書をオンラインで閲覧またはダウンロードできます。Dimplex Alderbury ALB20 2 ページ。 Fan heater
ページを印刷する
Operation
The unique flame effect may be enjoyed whether or
not the heating elements are in operation.
Controls
The heater controls are located on the left hand side of
the fan heater. (see fig 1).
Three switches provide a choice of heat settings. A
switch is in the ON position when the red indicator
mark on the switch is visible.
Switch 1 - Controls the electricity
supply to the heater
and the flame effect.
Note: This switch must
be in the ON position
for the heater to
operate.
Switch 2 - Provides 1kw heat output.
(Models FIF15 & MRL15, 750W heat output)
Switch 3 – Provides 2kw heat output with switch 2.
Models FIF15 & MRL15, 1.5kW heat output)
(
Maintenance
WARNING – BEFORE UNDERTAKING ANY
MAINTENANCE OR CLEANING REMOVE PLUG OR
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Lamp Replacement
One lamp is located beneath the fuel effect.
To gain access to the lamp, the top cover secured by
two screws must be removed. The screws are located
at the back of the stove. (see fig.3).
Fig.3
Remove screws slide top backwards and lift clear.
Remove rear glass and fuel effect.
This appliance complies with European Safety Standard EN 60335-2-30, and European Standards EN 55014, EN 60555-2
and EN 60555-3 for Electromagnetic Compatibility. These standards cover the requirements of EEC Directives 73/23 and 89/336.
Glen Dimplex UK Limited
Millbrook House
Grange Drive
Hedge End
Southampton
Hampshire
SO30 2DF
Replace the defective lamp with a 240V 60W B22
Fireglow 2 pin bayonet cap lamp. Fit the fuel effect and
rear glass back in position ensuring the reflectors are
not trapped. To refit top, locate and slide forward to
Fig.2
engage under the ledge at the front. Secure with
screws.
Safety cut- out
An automatic cutout will switch off the heater if for any
reason it overheats. This could occur for instance, if
the air inlet or outlet were restricted in any way. The
cut-out will continue to operate until the restriction has
been removed, after which normal operation will
resume.
Cleaning
For general cleaning uses a soft clean duster or, if
necessary, damp clothe – never use abrasive
cleaners.
The glass viewing screen should be cleaned carefully
with a chamois leather. DO NOT use proprietary glass
cleaners.
After Sales Service
Your product is guaranteed for one year from the date
of purchase. We undertake to exchange or repair free
of charge within this period, any part (excluding lamps)
found to be defective due to manufacturing fault.
Should you require after sales service, please get in
touch with the supplier through whom you purchased
the appliance or your nearest Dimplex Service Agent.
Please do not initially return a faulty appliance or part
of an appliance to us as this may result in transit
damage and/or delay in providing service. Let us know
your difficulty quoting the model number and series
letter of the appliance. We will then take the
appropriate action.
UK customer help line (8.00AM – 6.00PM Mon-Fri; 8.30AM-1.00PM Sat)
Customer Services:
Tel.
Republic of Ireland
REAR
GLASS
Fig.4
0870 7270101
Fax. 0870 7270102
01. 8424833
FRONT
GLASS