- ページ 4

ディスペンサー Croydex PA670322のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Croydex PA670322 6 ページ。 Slim line wall mounted soap dispenser 3 pumps

SECTION 3 - INSTALLATION

INSTALLING THE WALL BRACKET

BEFORE INSTALLING

the wall bracket, ensure that the safety

warnings in section 1 are followed.

Place the bracket against the wall in the desired position.

Place the spirit level along the top of the bracket, level and mark

the hole centres for drilling.

fig. 1

Drill the holes to a depth of 34mm in the marked positions

using a 7mm masonry drill. If the product is being fitted onto a

ceramic tiled wall - a ceramic drill bit should be used.

(See Fig. 2)

fig. 2

(See Fig. 1)

Insert the wall plugs flush to the wall surface. If fitting to a

tiled surface the wall plugs should be inserted below the surface

of the tile to avoid cracking.

(See Fig. 3)

fig. 3

Insert the wall screws into the wall plugs and tighten with a

cross head screwdriver until the screw heads are approximately

5mm from the wall surface.

(See Fig. 4)

fig. 4

S&H 080 R01