- ページ 7

無線アクセスポイント 3Com 8500のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。3Com 8500 10 ページ。 Wireless lan access point
3Com 8500 にも：データシート (4 ページ), データシート (4 ページ), クイック・スタート・マニュアル (8 ページ)

ページを印刷する

09-2292-00AC.fm Page 7 Tuesday, March 11, 2003 3:53 PM

Documentation and Software Utilities

The installation CD includes documentation and software utilities to help you set up and administer the

wireless components of your network. To view product documentation, select View the Documentation

from the CD Startup Menu and then select the item you wish to view. To install utilities, select Tools and

Utilities from the CD Startup Menu. Select the items you wish to install and follow the onscreen

instructions. The software Tools and Utilities include:

3Com Wireless Infrastructure Device Manager. Use this tool to discover access points

and select devices for administrative changes.

3Com 3CDaemon Server Tool. This tool can act in four different capacities:

As a TFTP Server, necessary for ﬁrmware upgrades, and backup and restore functions. Use

this option if you do not have a TFTP server set up.

As a SysLog Server, which is necessary to view SysLog messages.

As an optional TFTP Client.

As an optional FTP Server.

3Com Network Supervisor v4.01. The 3Com Network Supervisor (3NS) v4.01 graphically

discovers, maps, and displays network links and IP devices, including 3Com wireless access

points. It is not required for access point management.

Internet Explorer 5.5. This browser is included for your those who do not have a

suitable browser.

Conﬁguration Notes

For a new access point installation, the default WLAN Service Area (ESSID) is 3Com, no

security is set, and channel selection is set to Channel 11. Also, unless it detects a DHCP

server on the network, the access point uses Auto IP to assign an IP address of the form

169.254.xxx.yyy, where xxx and yyy are random numbers.

Use the 3Com Wireless Infrastructure Device Manager to locate 3Com Wireless LAN devices

and launch their conﬁgurations. When installing the device manager, make sure the

computer is connected to the same network as the device to be conﬁgured. After installing

and launching the device manager, select the device to be conﬁgured from network tree and

click Conﬁgure to launch the conﬁguration Web interface. Refer to the Access Point 8200/

8500/8700 User Guide (included on the installation CD) for detailed information and

instructions on locating and conﬁguring access points.

If you experience difﬁculty with the installation, see the Troubleshooting section of the

User Guide.

For the latest networking information, see the 3Com Corporation World Wide Web site:

http://www.3com.com/.

10 Regulatory Information

This product is in compliance with the essential requirements of Directive 1999/5/EC.

Channel Selection in France

In France, this product must be conﬁgured to operate on a legal channel. Channels 10 - 13 are allowed.

User documentation should be consulted to ensure that this product is used in accordance with local

spectrum restrictions.