- ページ 6

圧着工具 CRS 5AHPR0のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CRS 5AHPR0 9 ページ。 Electronic crimping tool hps with external activation

ページを印刷する

Electrical Connection (Active Crimp or Serial Control)

For remote activation (to activate the crimp cycle with a simple

contactor) a connection can be made through the case wall of

the crimping tool to the power supply adapter circuit board.

There is a two-pin connector (P6, the lower white connector in

the photo below) on this board that is wired in parallel to the

activation button on the crimping tool itself. If these pins are

shorted together the crimper will cycle.

Caution:

The motor/gearbox

assembly must

remain in its seat

when the top case is

removed and

replaced in order to

avoid damage to the

main circuit board.

Full Serial Control

The power supply adapter board also has provision for a serial interface that can allow a

greater degree of external control, for example to change the crimper setting, to reset

the tool, to receive error messages for logging, to acquire cycle data, etc. An RS485

connection (19.2 BAUD, 8 bits, no stop bit) is available through a DIN connector, which

can be added to the top of the unit next to the power connection.

The serial connection can be tested with a sample C# Windows program. The actual

machine control would be effected by the machine designer, directly from a PLC or

through an OPC driver (for example).

The following instructions are implemented in the serial interface:

Instruction

Notes

ANSWERME

"xx" is percent of the maximum stroke for the

MOVETOxx

selected jaw set.

RETRACT

REZERO

Sets the selected jawset. "xx" = 8, 11, 13 or 20. "a"

JAWSETxxa

= C or D. JAWSET with no size parameter will

cause the crimping tool to answer with the

information as to the currently selected jaw set, in

the format "JAWSETxxa".

Purpose

Verify connectivity

Move the plunger to a selected position.

Moves the plunger back to the top

position.

Moves the plunger up to the hard stop

past the top position to establish a zero

point.

Select a jawset, or request the jawset

information from the tool.

Chromatography Research Supplies, Inc.