- ページ 11

エンクロージャー CRU RTX430-3QRのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CRU RTX430-3QR 16 ページ。
CRU RTX430-3QR にも：クイック・スタート・マニュアル (4 ページ)

d. Unless you wish to customize the settings in these dialog prompts, click Next on the

Select Partition, Specify Volume/Partition Size, and Assign Drive Letter or Path dialog

prompts, leaving the default settings.

e. You will now see a window that allows selection of a file system. Choose NTFS and

enter a name for the new volume. Be sure to check the box labeled Quick Format,

which will ensure that the formatting process takes less than a minute.

Click Next and then Finish to start the format process. The new volume can now be

found by opening a File Explorer window.

Windows 7

a. Click on the Start Button, right-click the Computer button in the Start Menu, and

then select Manage. In the left pane of the Computer Management window that

opens, left-click on Disk Management (labeled 'A' in Figure 2).

b. The drive should appear in the list of Disks in the lower pane. You may need to scroll

down to see it. If the drive is already formatted, you can identify it easily by its volume

name. If the Device Properties Box (labeled 'B' in Figure 2) says "Not Initialized", you'll

need to initialize the disk before formatting it.

Right-click where it says "Not Initialized" and select Initialize Disk. If you are

prompted to select a partition type, select GPT.

c. To format the volume, right-click the Drive Properties Box (labeled 'C' in Figure 2)

and select New Simple Volume...

Figure 2. The Computer Management window in Windows 7. 'A' denotes the Disk Management section, 'B' denotes the

Device Properties Box, and 'C' denotes the Drive Properties Box.

RTX430-3QR User Manual