- ページ 7

コンピュータ・ハードウェア CRU Dataport DataPort 250のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CRU Dataport DataPort 250 12 ページ。 Usb 2.0 enclosure

Setting up the Drive for Windows 2000

WARNING: Formatting your drive will result in loss of data.

Connect the DataPort

250 to your computer. A new window will pop

™

up for the New Hardware Wizard (see Diagram 4). Follow the

instructions to add the new drive. After completing these instructions,

do the following:

Right click on My Computer

Click on Manage

In the Storage sub-section, click on Disk Management to

display a list of all the drives connected to your computer.

If you have not used the drive before you will have to partition it.

Left click on Action, select All Tasks and then left click on

Create Partition. REMEMBER, formatting will result in loss

of data.

This will bring up the Create Partition Wizard screen (see

Diagram 5). Follow the instructions and the drive will be ready

to use.

Diagram 4

WWW.CRU-DATAPORT .COM • (800) 260-9800

Diagram 5

Setting Up the Drive for Windows XP

WARNING: Formatting your drive will result in loss of data.

Connect the DataPort

250 to your computer. Check to see if the

™

hard disk drive is accessible in My Computer. If it does not show up,

do the following:

Right click on My Computer

Click on Manage

In the Storage sub-section click on Disk Management; this

will show all the drives connected to your computer.

If you are prompted to initialize the drive, follow the directions.

REMEMBER, formatting your drive will result in loss of data.

You should now see the hard disk drive in the list of drives on the right

side of your window.

Right click on the drive and click New Partition (see Diagram 5).

This will launch a wizard that allows you to partition the drive, format it,

and assign it a drive letter.