- ページ 8
ペットケア製品 aeolus UC-1901BKのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。aeolus UC-1901BK 10 ページ。 Professional multifunctional veterinary intensive care unit
ページを印刷する
No other function can be set when the unit is being disinfected. The disinfecting process can be
cancelled at any time returning the unit to its previous settings. All other lights will be cancelled and all
functions will be stopped during the disinfection process.
25.0
14. Printing Intervals Set
30.0
50
a) Enter "Printing Intervals".
1500
b) Click the existing time figure in "Printing Intervals" bar.
-
3
c) Input the suitable printing intervals by clicking the newly
+
opened setting box, in the range of 0 -60 minutes. Setting it at
0 min will shut down this printing function.
中
d) On the printing slip, four key parameters can be displayed,
Auto
Temperature, Humidity, Oxygen Density and Carbon Dioxide
Density.
e) "Hospital or Clinic" names can be printed on the slip as a
customization option; please contact your local supplier for
25.0
more details.
30.0
f) Switch on printing function when needed by shifting OFF
50
button to ON as displayed below.
1500
-
3
15. Running Status
+
中
On the Running Status page, all real-time running
Auto
status will be displayed.
16. CO
Remover Replacement Reminder
2
Depending on varied types of soda lime powder
from different suppliers, the effective validation
time may be different; the operator can set
different replacement reminding times accordingly.
At the bottom of the above page for "Running Status", the estimated CO
is displayed.
Click the boxes shown above to set effective time for soda lime CO
In box 4, it shows the elapsed working time from last replacement; box 2 is for resetting the validation
time for different suppliers' soda lime.
If you are using the soda lime from our company, please click "RENEW" button to set it at 800 hours
after replacing.
Note: It's highly recommended to use our soda lime to ensure a reliable working efficiency and
service life.
17. Parameter Calibrations
The Parameter Calibration needs to be managed
by trained qualified technician, or under the
guidance and supervision of our technicians.
On this page, you can make adjustments to these
parameters below.
Temperature Setting Zero and Full.
Humidity Setting Zero and Full.
Ambient Temperature and Auxiliary Temperature.
CO
Density Setting Zero and Full.
2
25.0
0
30.0
0
50
1
1500
9
3
-
+
8
OFF
0
中
Prin�ng Intervals
0
Auto
33
OFF
Prin�ng Intervals
1
OFF
30
25.0
0
0～60
9
OFF
30.0
0
1
2
3
50
OFF
8
1
4
5
6
1500
9
3
-
7
8
9
+
+/-
0
8
.
中
OFF
0
Prin�ng Intervals
30
Auto
33
OFF
1
OFF
20
OFF
8
OFF
remover replacement time
2
remover reminder.
2
CO
Remover
2
Replacement Reminder
④
②
12
OFF
OFF
O
Density Setting Zero and Full.
2
OFF
Note: You need a pass code to enter this page, please contact your local supplier or service center
for further assistance.
OFF
OFF
18. History
OFF
The running status of four key parameters,
temperature, humidity, CO
will be recorded every minute.
OFF
In our system, the operation history can be tracked
OFF
for up to 72 hours /3 days as maximum.
CLR
All the curves will be displayed on this interface, you
OFF
DEL
can click on any of them to enlarge the whole curve
OFF
and get more detailed statistics.
Enter
OFF
ON
19. Operation Guide
All the instructions shown above are also
installed in the control panel system; they can
be found in the Operation Guide page shown.
The instructions are displayed with detailed
wording and photos.
20. Accessories Mount Installation
This stainless steel wire grid is designed for
mounting all necessary accessories, such as IV
pole, infusion pump, syringe pump, monitor, etc.
Please insert the bottom foot into the fixture hole
on top of the large compartment first, then match
and insert the top pin into the triangle connector
between the two medium compartments as
indicated by the picture.
RENEW
③
21. Door Shade Curtain Installation
A slide track and four hooks are installed on top of
the transparent doors on each compartment, to
hang the shade curtains helping cut out light and
noise transmissions to the compartment and calm
the patients.
density and O
density,
2
2
13