- ページ 5

ストレージ CRU Rax 2-BAY RAX215-QRのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CRU Rax 2-BAY RAX215-QR 13 ページ。

ページを印刷する

CRU

2.1.2 HDD installation for RAX211-QR and RAX212-QR

a) Slide the drive carrier out of the RAX.

b) The carrier's cover is held in place by a screw on the

rear of the carrier. Remove the screw then remove the

cover.

c) Slide the drive in from the front of the carrier.

d) Mate the connection on the drive with the connection

on the drive carrier circuit board.

e) Flip the drive/carrier assembly over, and secure the drive in place with the provided screws.

Attach the Temperature Control Cooling Sensor to the top of the drive with an adhesive strip.

g) Replace the carrier cover and secure the screw on the rear of the carrier.

h) Slide the carrier into the RAX.

NOTE – A flashing red LED on the bay indicates bay fan failure. Call CRU technical support.

2.1.3 HDD installation for RAX215-QR

a) Slide the drive carrier out of the frame.

b) The carrier's cover is held in place by two

screws—one on either side of the carrier.

Remove these screws then remove the cover.

c) Insert the drive into the carrier.

d) Mate the connection on the drive with the connection on the drive carrier circuit board.

e) Flip the drive/carrier assembly over, and secure the drive in place with the provided screws.

Replace the drive cover and secure the screw on the rear of the carrier.

g) Slide the carrier into the frame assembly.

NOTE – A flashing green LED on the bay indicates bay fan failure. Call CRU technical support.

2.1.4 Drive, bay, and frame installation for RAX219 and models with one open bay.

2-Bay RAX models can be purchased with one or both bays unpopulated. RAX219 is the "empty bay"

model of the 2-bay RAX series. For instructions on how to install your HDD, bay, or frame into these

products, please see the install guide that accompanies your particular bay.

2.2 Tips for Rack Mounting RAX QR

Elevated Operating Ambient Temperature: Install the equipment in an environment compatible with the

maximum ambient temperature of 40° C

Ventilation: Do not block or inhibit the air flow to the unit.

Mechanical Loading: Use care to ensure the RAX is mounted in a level position to prevent damage.

Circuit Overloading: Do not overload the circuits. Refer to the name plate ratings on the equipment.

Reliable Grounding: Maintain grounding of rack-mounted equipment by using indirect connections to the

branch circuit (e.g. UPS battery backups, power strips).

2.3 Connecting and Powering RAX QR

RAX QR can connect to your computer in one of four ways.

Choose one of those four cable types to use and plug it into the unit.

Plug in the power cord to a grounded electrical outlet.

With hard drives in the unit, turn on the power.

Your RAX QR is ready to use.

U s e r M a n u a l f o r R A X Q R ( A9-210-0009) REV 1.0

eSATA Port

FireWire Ports

USB Port

- 5 -