- ページ 3

ドライヤー aeolus TD-901TのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。aeolus TD-901T 4 ページ。 Pet dryer

ページを印刷する

CYCLONE

What makes

Our goal at AEOLUS is to ensure that we are the partner of choice for all your requirements in the pet

industry. AEOLUS is committed to bringing you cutting edge technology at affordable prices, (so that all

your needs are met).

We studied all the available dryer choices in the market and understand that there is a need for a machine that

has a stronger blow force at a value price. Blow force is a more important parameter than just the wind speed, or

air volume. Aeolus feels that the blow force parameter is a more important indicator of performance. Blow force is

the critical factor. We are proud to offer this powerful feature, (currently not available in any other machine on the

market).

Aeolus model TD-901T is our high performance model. Higher blow force, higher wind speed, lower noise,

longer life span, more durable, and easier to operate and maintain.

Super Blow Force

Years of research lead to the new 52mm diameter hose system. This is a much wider hose than previous

models (which were 40mm), allowing for a higher blow force of 605grams

unmatched wind speed of 60meters per second

②

(an increase of 40%). In order to enhance the blow power

we have enlarged the air intake vent 300%. These factors now allow an even stronger flow of air.

Energy Savings

A better air flow system and a smaller flow friction force, has allowed AEOLUS TD-901T to perform at a

high energy efficient ratio.

According to test results the TD-901T 1200 watt motor outperforms a 1600 watt dryer currently on the

market.

AEOLUS TD-901T will allow for a 30% savings in energy consumption over previous models.

Motor Life Span

AEOLUS TD-901T will allow for a much extended product life span. Based on the following points:

Longer carbon brush (lengthened from 32mm to 38mm; the longest currently on the market).

Smaller carbon pellets and a smoother rotor technology creates smaller sparks which gives the TD-901T a

longer life span (increased by 30% compared to the previous model).

The result of this new motor technology will give the user 800 hours for one pair of carbon brushes, and can

be changed an additional two times, to give a total performance time of 2,400 hours.

AEOLUS R & D technology has greatly improved the carbon brush spring (which prevents the spring from

damaging the motor and in turn insures a longer life span of the product).

Maintenance

AEOLUS has improved the component parts of the motor so that there is a more efficient way to open the

housing of the machine (allowing for easy removal of all electrical components). TD-901T clip replacement

technology in the motor, allows for a quicker and easier replacement of the carbon brush, and all compo-

nent parts.

Noise Performance

Advanced metal stretching technology in the TD-901T, has eliminated all welded seams, (on the front and

rear caps of the machine and the main housing), leading to a fully sealed housing. thus reducing the noise

emitted from the machine.

Test results show at the highest wind speed the noise emitted from the TD-901T is 83 decibels, (compared

to the current industry standard of 100 decibels this is a 20% reduction)., which provides for a more comfort-

able environment (and performance of the product).

dryer the best one in the world?

Safety Performance

The USA produced temperature switch, cuts the heating element of the TD-901T in 25ms, and begins working

again after the core temperature of the heating element reduces to 85 degrees Celsius. This allows the

TD-901T to perform at an output temperature of a maximum of 52 degrees Celsius

TD-901T offers high temperature resistant silicone wires, high temperature resistant switch and circuit boards,

an emergency cut off switch if a motor overheats. Durable ground wires provide safe performance.

Ease of Use

Aeolus TD-901T easy use nozzle attachment allows the operator to remove the nozzle head with one finger, with

a simple click of the attachment.

Accessories

AEOLUS TD-901T has designed optional accessories for multi-use of the machine:

①

, (an increase of 45%); and an

Wall mounting bracket

Groomers' third arm

Dryer Stand

Please check instruction manual for further details.

Testing Condition:

1) 2.5m long flexible hose, Φ16mm round nozzle, fixed above the high precision electronic scale at 220mm, record the blow force indication.

2) 2.5m long flexible hose, Φ16mm round nozzle, fixed at the distance of 180mm to the center of wind cup, record the wind speed indication.

3) 52℃ means the sensor fixed at the position of 3cm away from the end of round nozzle never takes a value higher than 52℃ in a 3 hours

continuous testing, when the environmental temperature is at 32℃.

Remarks: all the testing is executed on professional testing platforms.

Direction for Use

1. Attach the flexible hose to the front cap connector.

2. Plug into socket, switch power on.

3. Adjust wind speed, turn on or off the heating switch and choose suitable nozzle according to your need.

4. Turn the wind speed knob back to Minimum, turn off the heating switch and then turn off the power switch

after use.

Maintenance

1. Please clean the foam filter (by washing or air blowing). Reinstall filter again when it's dry.

2. Keep the surface clean and dry, and use a dry soft cloth to clean the painted surface.

3. Wet cloth with neutral detergent and wipe to remove stubborn stains and dirt.

4. Use only mild neutral detergent.

5. When the carbon brushes wear down replace the brushes following the guide line in this booklet or consult

with the professionals.

Parameters

Product Name

CYCLONE

100V -120V

Rated Voltage

③

(50Hz-60Hz)

Rated Current

16.4A

(110V)

Maximum Power

1800W

(110V)

Heating Power

600W

Maximum

Temperature

52℃

(Environmental Temperature at 32℃)

Net Weight

4.3kg

Product Dimension

340×160×210mm

(Flexible Hose not Included)

Class

Remarks:

1.The parameters are tested with 2.5m long flexible hose and Φ16mm round nozzle.

2.We may not publish formal notice in written form when the parameters changed after

new improvements.

3.The manufacturing standards and testing stands subject to TOEX company standard:

TXPS-ALPD-0901(T)-2011.

Safety Instruction

1. Pet dryer needs a single outlet which is at least 10Amps and a dedicated ground wire. Please connect pet

dryer with a correct outlet and do not share with other appliances.

2. Before turning on or off, please adjust the wind and temperature to the low. This can extend the life of the machine.

3. Do not insert pins or any metal objects into the machine. This will prevent electric shock and short circuiting.

4. Do not use a cloth or bag to muffle the diffuser or foam filter. This could damage the machine.

5. If the machine has been used for some time and a malfunction occurs, you should ask a professional to repair

it. Do not disassemble by yourself.

6. If the power cord is damaged, discontinue use and have repaired by a professional.

7. Please keep children away when you operate the machine.

8. Dropping or heavily banging or hitting the machine could damage the frame and motor.

9. People with pacemakers or heart aliments should not operate this machine.

10. Please hold the nozzle and hose firmly before turning the machine on, or the hose may wiggle and cause injury.

11. Must plug hose into the front cap connector before turning the machine on.

12. It's strictly forbidden to touch the components in the front cap connector with hand or any other objects in any situation.

13. Appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

14. Children should be supervised to ensure that they do not play with the appliance.

15. If the supply cord is damaged, it must be replaced by the manufacturer or service agent or a similarly qualified person.

Circuit Diagram

MOT1

TD-901T

Item Number

Blow Force

605g

SWT

SW2

Maximum Wind

60m/s

Speed

VR2

SW1

Minimum Wind

27m/s

Speed

Noise

94dbA

VR1

(on back of the dryer at 0.5m)

Noise

83dbA

(on top of the dryer at 0.5m)

DB3

TRIAC

Gross Weight

5.1kg

Packing

Dimension

435×305×235mm

(L×W×H)