- ページ 10

キッチン家電 Crude Steel CX805SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Crude Steel CX805S 13 ページ。

ページを印刷する

USING THE MINCER (CHOPPER)

- The chopper is suitable for grinding hard foods like meat, cheese, onions, walnuts, garlic,

almonds, carrots, plums, peppers, vegetables, dry bread, etc.

- Do not try to chop very hard food such as ice cubes, coffee beans, nutmeg, bones or

other types of food.

1. Remove the chopper bowl cover (9).

Place the blades (12) into the central pin of the bowl

Warning! → Be careful, the blade is very sharp. Always hold it by the top part of the plastic

3. Place the food into the chopping bowl (11).

- First, grind the more solid foods then add the softest foods. This will help you obtain

a more homogeneous mix.

4. Place the cover on the chopping bowl (9) by closing it hermetically (10).

5. Attach the main unit (5) of the hand blender firmly into the chopping bowl (Fig. 1 - Page 7).

6. Choose the speed controller (1) then push the suitable button operation (3) or (4 Turbo).

Hold the main unit with one hand and the chopping bowl with the other.

7. After use, remove the main unit from the chopping bowl by pressing both eject buttons

8. Remove the chopping bowl cover (9) and the blades with careful.

Safety System:

Each time the cover is removed from the chopping bowl (9), the plastic

shaft that contains the blades can leap if the content is not very thickish, as a safety system

to stop the blades rotating.

BALLOON WHISK OPERATION

Use the balloon whisk (13) only for whipping cream, beat egg whites and mix dough for

cookies and desserts prepared.

1. Insert the balloon whisk into the support (A) - (Fig. 4 - Page 7), then insert into the main

unit

(5) as shown (Fig. 2 - Page 7).

2. Choose the speed controller (1), then push the suitable button operation (3).

Variable speed setting Nº 1 is recommended without using the turbo function.

3. Use the balloon whisk for no more than 1 minute, then rest for 1 minute.

4. To eject the balloon whisk (13) press both eject buttons (6) from the main unit (5).

CLEANING

1. Unplug the appliance before cleaning.

2. Disassemble all parts and pieces.

pull by the top plastic and rinse immediately.

3. Clean the main unit of the hand blender (5), the connection cord, the

balloon whisk support (A) - (Fig. 4 - Page 7) and the cover of the chopping bowl (9) with a

damp cloth. Wash with little water the cover of the chopper bowl (9) because their gear

could lose lubricant.

4. The remaining parts can be cleaned with soapy water and rinsed with water under the tap

or in the dishwasher.

WALL MOUNT BRACKET

Attach the wall mount bracket (14) by using the plugs and screws to hold the hand blender,

the balloon whisk and wrap the cord, see (Fig, 3 - Page 7).

for chopping (11).

Warning!→ the blades (12) are very sharp , always

(6).