ページを印刷する
EN
Never insert food with hands. Always use the food presser.
Do not use your fingers to remove food from the sides of the bowl while the appliance is
functioning. Always use the appropriate spatula.
Do not remove food from the sides of the bowl while the appliance is operating. Switch the
appliance off first and then unplug it.
Slicing, grating/julienne cutting
- Fit the required blade for slicing (W) or for grating/julienne cutting (J), on the apposite support (K)
so that the hole on the insert perfectly fits on the support pin; press the insert downwards until it
locks in place (Fig. 14).
- Mount the support (K) complete on the shaft (X) of the food processor goblet (V) with the blade
upwards (Fig. 15).
- Fit the lid (S) on the goblet (V) and proceed as indicated in the paragraph "Chopping".
ATTENTION:
Blades are sharp, handle them with care.
CLEANING AND MAINTENANCE
ATTENTION:
NEVER IMMERSE THE APPLIANCE BODY, THE PLUG AND THE POWER CORD IN WATER OR
OTHER LIQUIDS, USE A DAMP CLOTH FOR CLEANING.
EVEN WHEN NOT IN USE, UNPLUG THE APPLIANCE BEFORE MOUNTING OR REMOVING
THE SINGLE PARTS OR BEFORE CLEANING.
Blades are sharp, handle them with care.
- Remove all attachments used, by operating in the reverse way compared to the assembly opera-
tions previously described.
- Use a slightly wet cloth for cleaning the motor body (D).
- The chopper goblet (O), the food processor goblet (V), the potato masher (L) and the blades (P-U-
W-J) can be washed in the top part of the dishwasher at a max. temperature of 50°C/ 122°F. For
cleaning the other attachments, it is recommended to wash them under running water using a mild
detergent.
ATTENTION:
Do not clean with abrasive sharp objects.
After cleaning, let any part completely dry before mounting.
- 10 -