- ページ 2

エアコン Ariklima ARICOOL1HのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ariklima ARICOOL1H 6 ページ。 Evaporative air cooler

I. Functions

Note: the instruction describes all the functions. The users can choose

them according to the actual product function.

On/off: when the fan is on standby, pressing the button means "on" ;

repressing the button means "off", the fan stops working, and all

lights go out, then the fan is on standby.

Wind speed/shift: in the working state, wind speed can be regulated

by pressing the button; if the button is pressed repeatedly, air supply

model can be chosen including three models, namely high-

medium-low.

Swing: in the working state, horizontal automatic air supply can be

realized by pressing the button; but the air supply will be halted when

the button is pressed once again.

Cooling: In the working state, pressing the button means start of the

cooling function, and when pressing it again, the cooling function

ceases.

Heating: turn the heating knob on the right, then the cooling function

is replaced and the default low-heating function is set on. Press the

heat button, the high-heating function occurs. If turning the off button

suddenly, hot air flow will go away after 20 seconds. While the

cooling function is wanted, just turn the knob again.

Timing: in the working state, if the button is pressed, the timing

off-time can be available; if pressed repeatedly, circular off-time can

be set. The off-time is, in order, 0.5hour→1hours→1.5hours→......

7.5hours

Natural wind: in the working state, the natural wind can be set by

pressing the button. When pressing it again, the natural wind can be

ceased.

★★★Attention:

If no water is supplied, please do not press cool button in order to

protect the water pump. And please be careful to operate while adding

water.

★★★Attention:

Keep the unit out of children's reach. Always have an adult to

supervise the children whenever they operate the unit.

Ensure that the power supply is disconnected when moving and

cleaning the unit.

Ensure that the power supply is disconnected when moving and

cleaning the unit.