- ページ 3

ストーブ Dimplex CourchevelのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dimplex Courchevel 4 ページ。
Dimplex Courchevel にも：使用方法 (5 ページ), 使用方法 (4 ページ)

ページを印刷する

- Club Stove.

- Courchevel Stove.

IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Important Safety Advice

When using electrical appliances, basic precautions

should always be followed to reduce the risk of fire,

electrical shock and injury to persons, including the

following:

If the appliance is damaged, check with the supplier

before installation and operation.

Do not use outdoors.

Do not use in the immediate surroundings of a bath,

shower or swimming pool.

Do not locate the appliance immediately below a fixed

socket outlet or connection box.

This appliance can be used by children aged form 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user

maintenance shall not be made by Children without

supervision.

Children of less than 3 years should be kept away

unless continuously supervised. Children aged from 3

years and less than 8 years shall only switch on/off the

appliance provided that it has been placed or installed

in its intended normal operating position and they have

been given supervision or instruction concerning use

of the appliance in a safe way and understanding the

hazards involved. Children aged from 3 years and less

than 8 years shall not plug in, regulate and clean the

appliance or perform user maintenance.

Do not use this appliance in series with a thermal

control, a program controller, a timer or any other

device that switches on the heat automatically, since a

fire risk exists when the appliance is accidentally

covered or displaced.

This appliance is not equipped with a device to control

the room temperature. Do not use this appliance in

small rooms when they are occupied by persons not

capable of leaving the room on their own, unless

constant supervision is provided.

Ensure that furniture, curtains or other combustible

material are positioned no closer than 1 metre from

the appliance.

In the event of a fault unplug the appliance.

Unplug the appliance when not required for long

periods.

Although this appliance complies with safety

standards, we do not recommend its use on deep pile

carpets or on long hair type of rugs.

The appliance must be positioned so that the plug is

accessible.

If the supply cord is damaged it must be replaced by

the manufacturer or service agent or a similarly

qualified person in order to avoid a hazard.

Keep the supply cord away from the front of the

appliance.

Warning: In order to avoid overheating, do not cover

the appliance. Do not place material or garments on

the appliance, or obstruct the air circulation around

the appliance, for instance by curtains or furniture, as

this could cause overheating and a fire risk.

Warning: In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must

not be supplied through an external switching device,

such as a timer, or connected to a circuit that is

regularly switched on and off by the utility.

CAUTION - Some parts of this product can become

very hot and cause burns. Particular attention has to

be given where children and vulnerable people are

present.

This instruction can be found at WWW.DIMPLEX.CO.UK

General

Unpack the heater carefully and retain the packaging for possible

future use, in the event of moving or returning the fire to your supplier.

These models are designed to be free standing and are normally

positioned against a wall.

The fire incorporates a flame effect, which can be used with or

without

heating, so that the comforting effect may be enjoyed at any

time of the year. Using the flame effect on its own only requires little

electricity.

A choice of 1kW or 2kW heat output is provided by the fan heater,

which is located at the bottom of the unit.

Before connecting the heater check that the supply voltage is the

same as that stated on the heater.

Please note: Used in an environment

very low, it may be possible to hear a sound which is related to the

operation of the flame effect. This is normal and should not be a

cause for concern.

Electrical connection

WARNING – THIS APPLIANCE MUST BE EARTHED.

This heater must be used on an AC ~ supply only and the voltage

marked on the heater must correspond to the supply voltage. Before

switching on, please read the safety warnings and operating

instructions.

Controls

- see Fig. 2

These switches provide a choice of heat settings, The appliance is

in standby mode when the mainslead is plugged in. This is indicated

the

red

neon

behind

The two selector switches are in the ON position when the side with

the markings on (i.e. I, or II) is pushed in.

Selector switch 1 (0)

Controls the electricity supply to the

heater and flame effect. Press for 'ON' and

'Standby'. If both selector switches 2 and 3

are in the OFF position, the product works

on flame effect only.

Selector Switch 2 (I)

Provides 1kW heat output

Selector Switch 3 (II)

Provides 2kW output with switch 2

Remote

control - see Fig. 3

The maximum range of use is ~ 15metres.

Warning: It takes time for the receiver to respond to the transmitter.

Do not press the buttons more than once within two seconds for

correct operation.

Battery information - see Fig. 3

Slide open the battery cover on the back of the remote

control

Install AAA batteries into the remote control

Replace the battery cover.

Discard leaking batteries

Dispose of batteries in the proper manner according to provincial

and local regulations.

Any battery may leak electrolyte if mixed with a different battery

type, if inserted incorrectly, if all the batteries are not replaced at the

same time, if disposed of in a fire, or if an attempt is made to charge

a battery not intended to be recharged.

Thermal Safety Cut-out

The built-in overheat cut-out switches off the appliance automatically

in the event of a fault. If this occurs switch off the appliance or

disconnect the mains plug from the socket. After a short cooling

down phase, the appliance is ready for use again. If the fault should

occur again, see your local dealer.

where background noise is

the

flame

effect

screen.