- ページ 9

カー・ステレオ・システム Crutchfield 019 0021のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Crutchfield 019 0021 14 ページ。 Ford mustang 2015 complete car audio

019 0021

Door Speakers

5. Pry out sides of door panel to release seven

(7) clips. Lift panel, disconnect wiring

harnesses and door release cable. Remove

door panel (Figures 5 & 6).

6a. Midrange Removal & Installation:

Remove two (2) phillips screws securing

speaker to factory bracket. Cut wires

from speaker and remove (Figure 7).

Note: Bracket will be reused.

Make wiring connections to new speaker

following instructions on page 13.

Return to this page to complete

installation.

Secure speaker to bracket.

6b. Woofer Removal & Installation:

Remove three (3) 7mm screws securing

speaker. Pull out speaker, disconnect

and remove (Figure 8).

Secure new speaker to adaptor bracket.

Connect speaker wiring adaptor of

replacement speaker to vehicle speaker

harness.

Secure speaker/bracket assembly

to location.

7. Test speaker operation and reinstall door

panel by reversing removal steps.

1-800-955-9094

TECHNICAL SUPPORT

(continued)

FIGURE 5

Door Release Cable

(use needle-nose pliers for removal)

FIGURE 7

Check that wires do not interfere with window operation.

Test door lock and release operation.

SAFETY CHECK

FIGURE 6

FIGURE 8