- ページ 7

モデム 3Com HomeConnect 3CP3617BのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。3Com HomeConnect 3CP3617B 8 ページ。 3com homeconnect 3cp3617b modems: installation guide

ページを印刷する

the correct Internet service provider, or choose Custom and enter the correct settings for your

system.

The screen below will be displayed while the software is installing. When the copying is complete,

click the Finish button that will be displayed on the last screen. You will need to shutdown the

machine to install the hardware for Windows 95, 98, ME, and 2000.

NOTE: NT users should install the hardware prior to initiating the software install.

When the copying is done, click Finish.

Installing the Hardware

Power down the machine and install the PCI card. Be sure the card is firmly seated in the PCI

slot. Connect the phone cable from the wall socket to the card. If other analog devices are

sharing the DSL line, make sure they are connected with filters.

Windows NT Only

Remote Access Services (RAS) and Reapplying the Service Packs

Customers using Windows NT will need to install RAS if it is not already installed. Refer to the

original installation instructions for RAS installation procedures. You will also need to reapply the

service packs (4.0 or higher). Do so by placing the Service Pack CD in the CD-ROM drive and

running the setup file.

Establishing A Connection

Once the 3Com software and hardware have been installed properly and there is a connection to

the live DSL line, you should see a green light in the Quick View icon.

NOTE: Quick View indicates the status of the DSL connection. It is located on the system tray which is

on the lower right portion of the screen.