録音機器 Crux SOOGM-16VのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Crux SOOGM-16V 5 ページ。

- Retains factory features in select GM LAN 29 Bit vehicles while functioning with an aftermarket

radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- Retains OnStar, factory Rear view camera and chime functions.

- Adds Forced Rear view and Front view camera while in motion using the factory side mirror

controls.

- Supports Bose, non-Bose and Y-91 audio systems.

- EIA color coded wiring for easy installation.

1. The Front and Rear fading are not retained on Y-91 Bose System.

2. Chime includes: seat belt, check engine, key in ignition, low fuel, low oil and lights on.

SOOGM-16V Module

SETTING THE AFTERMARKET RADIO BRAND

With the key in the off position, set the DIP switches to the corresponding aftermarket radio setting.

3.5MM SWC CABLE

Use the proper 3.5MM to 4-Pin SWC cable for the aftermarket radio you are using.

OPTION A is used for ALPINE, CLARION, (JVC and KENWOOD units will use the Blue/Yellow wire).

OPTION B is used for BOSS, DUAL, FAHRENHEIT, JENSEN, POWER ACOUSTIK, PIONEER, SONY and

SOUND STREAM units.

NOTE: Cap or insulate the 3.5mm plug or Blue/Yellow wire if not being used.

SOOGM-16V Harness

1 / 5

Video Harness

Antenna Adaptor

rev071217