- ページ 11

扇風機 Dimplex DCACP23のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dimplex DCACP23 17 ページ。 Air circulator + purifier

Operation

Note: Please remove the plastic bag from the HEPA filter before turning on the device.

ON/OFF

After the device is plugged in to a power supply, press the ON/OFF button to turn the unit

on. The defualt state the device will enter is low wind speed, with display panel and other

functionality off. Press this button again to switch the device off.

SWING

Press the SWING button to enable or disable the units horizontal swing functionality. When

this function is turned on, the SWING LED logo will be shown on the display panel. When

switched off, this will dissapear.

FAN SPEED

Press the FAN SPEED button to adjust the speed of the fan. The unit has 3 fan speeds being

low, medium and high, and adjusts in the following sequence: Low-Medium-High-Low etc. The

corresponding logo on the display panel will light up depending on the speed.

TIMER

Press INCREASE TIMER or DECREASE TIMER buttons to turn the timer function on. When

this is turned on, the 'h' logo on the display panel lights up. Press the INCREASE TIMER button

to increase the timer one hour at a time. Press the DECREASE TIMER button to reduce the

timer one hour at a time. The timer can be set for up to 24 hours. By pressing either button for

over 2 seconds, you can set your desired time quicker.

PLASMA

Press the PLASMA button to enable or disable the plasma functionality. This works to remove

germs and antigens from the air. When this is on, the PLASMA logo will show on the display

panel. When switched off, this will dissapear.

AI PURIFICATION

Press the AI PURIFICATION button to enable or disable the AI Purification functionality. When

switched on, the unit will take 60 seconds to detect the air quality. In this period, the LED Air

quality Monitor on the display panel will flash between green, yellow and red and run on high

fan speed. After 60 seconds, the LED display will settle on the determined colour and the fan

speed will automatically alter with the detcted air quality. When the air quality is good, the

LED display will be green and the device will run on low wind speed. When the air quality is

medium, the LED display will be yellow and the device will run on medium win speed. When

the air quality is poor, the LED display will be red and the device will run on high wind speed.

LIGHTS OFF

Press the LIGHTS OFF button to turn all indicator lights off on the device. If you would like the

lights to turn back on, press any button besides the ON/OFF button and all indicator lights

will turn on again.