- ページ 5

コントローラー Aeon Labs AEOEZW062のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Aeon Labs AEOEZW062 12 ページ。 Garage door controller

Behavior within the Z-Wave network

I On factory default the device does not belong to any Z-Wave network. The device needs to

join an existing wireless network to communicate with the devices of this network. This

process is called Inclusion. Devices can also leave a network. This process is called

Exclusion. Both processes are initiated by the primary controller of the Z-Wave network.

This controller will be turned into exclusion respective inclusion mode. Please refer to your

primary controllers manual on how to turn your controller into inclusion or exclusion mode.

Only if the primary controller is in inclusion or exclusion mode, this device can join or leave

the network. Leaving the network - i.e. being excluded - sets the device back to factory

default.

If the device already belongs to a network, follow the exclusion process before including it in

your network. Otherwise inclusion of this device will fail. If the controller being included was

a primary controller, it has to be reset first.

Inclusion and Exclusion