- ページ 7

コントローラー Aeon Labs AeotecのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeon Labs Aeotec 7 ページ。 Home energy meter
Aeon Labs Aeotec にも：ユーザーマニュアル (11 ページ), マニュアル (9 ページ)

ページを印刷する

10/19/2017

Resetting your Panic Button.

Your Panic Button can be reset to default factory settings with ease.

1. Press and hold the Learn button for 20 seconds with a pin.

2. The green and red light will alternate for 20 seconds, then the green light will stay solid for 2 seconds to indicate a

successful reset.

Setting your Panic Button into use/scene mode (secondary controller).

Each brand of Z-Wave gateway / hub has its own unique method for setting your Panic Button's user mode as a Group or

Scene controller. Please refer to your gateway's user manual for detailed instructions on this. In some cases, you will need to

utilize the technical parameter settings available in your Panic Button.

Parameter 250 [1 byte] = 1

1. Go to the parameter settings page, specific to your Panic Button, within your gateway's user interface.

2. If it does not already exist, add a new row or column to add Parameter number 250.

3. Set the size of the parameter to be 1 byte.

4. Set the value in order to place your Panic Button into Group or Scene Mode. Group Mode has a value of 0, Scene

Mode has a value of 1.

https://aeotec.freshdesk.com/support/solutions/articles/6000177086-panic-button-user-manual-

Panic Button user manual. : Aeotec by Aeon Labs

7/7